EduMandriva

форум российского сообщества Edumandriva

Форум предназначен для обсуждения вопросов проекта Edumandriva. По вопросам дистрибутивов Mandriva и РОСА просьба обращаться на forum.rosalab.ru, unixforum.org и linuxforum.ru

Текущее время: 13 дек 2019 10:30

Часовой пояс: UTC + 3 часа [ Летнее время ]




Начать новую тему Ответить на тему  [ Сообщений: 23 ]  На страницу 1, 2, 3  След.
Автор Сообщение
 Заголовок сообщения: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia2)
СообщениеДобавлено: 29 авг 2012 00:55 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
Прошу прощения, что не по Mandriva, но всё же это родственный дистрибутив.

Не монтируется смартфон LG Optimus L7 - операционная система Android ICS или точнее - Google Android на базе Android 4.0, ядро 3.0.8 - обновление до 4.0.3  ( приобрёл я его в связи с потерей MOTOROLA Milestine XT720 - монтировался с ходу, андроид 2.1.1).

Собственно - все устройства внешние монтируются, а LG  никак. В терминале он определяется..
команда:
lsusb
Код:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1a5c:3112  
Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 005: ID 04d9:1203 Holtek Semiconductor, Inc. Keyboard
Bus 002 Device 003: ID 058f:6364 Alcor Micro Corp. Hi-Speed 7-in-1 Flash Card Reader/Writer [Sabrent]
Bus 002 Device 007: ID 1004:631c LG Electronics, Inc.


На команду dmesg, выдаёт кучу информации, приведу только самые нижние:
dmesg:


Код:
[  175.828213] usb 2-1.2: Product: LG-P705
[  175.828215] usb 2-1.2: Manufacturer: LGE
[  175.828217] usb 2-1.2: SerialNumber: LGOTMS6fd27b3
[  763.365703] usb 2-1.2: USB disconnect, device number 5
[ 7842.676392] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd
[ 7842.762508] usb 2-1.2: New USB device found, idVendor=1004, idProduct=631c
[ 7842.762513] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 7842.762516] usb 2-1.2: Product: LG-P705
[ 7842.762518] usb 2-1.2: Manufacturer: LGE
[ 7842.762520] usb 2-1.2: SerialNumber: LGOTMS6fd27b3
[10785.329521] usb 2-1.2: USB disconnect, device number 6
[11082.470074] usb 2-1.3: new high-speed USB device number 7 using ehci_hcd
[11082.556354] usb 2-1.3: New USB device found, idVendor=1004, idProduct=631c
[11082.556358] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11082.556361] usb 2-1.3: Product: LG-P705
[11082.556364] usb 2-1.3: Manufacturer: LGE
[11082.556366] usb 2-1.3: SerialNumber: LGOTMS6fd27b3


Тут даже модель видна, но на этом и всё. Смартфон при подключении, показывает, что происходит синхронизация мультимедия, но ничего не происходит. PcmanFM - ничего...

ТОлько что пробовал на нетбуке ASUS EeePC 1015 PN  с установленным MINT 13- результат тот же. НАстройки смартфона, сделаны правильно. Еси терминал  видит, значит должен работать - но нет. Потскажите пожалста.

В терминале не силён, но  по подсказкам могу сделать.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 14:36 

Зарегистрирован: 19 окт 2010 14:51
Сообщения: 105
А что собственно от смартфона требуется-то?


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 15:46 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
Ну наверно я не буду качать фильм с трекера смартфоном (понятно наверное, что таким образом моих 200р. не хватит на счету) - проще наверно скачать на РС, переконвертировать и закачать на карту памяти в смартфоне. Кончно можно вынуть карту и через картридер закачать, но проблема заключается как раз в том, что достать карту из смартфона можно только сняв заднюю крышку. К сожалению это не есть гут, в противном случае износятся крепления и крышка начнёт сама отваливаться.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 17:05 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
skan40 писал(а):
НАстройки смартфона, сделаны правильно. Еси терминал  видит, значит должен работать - но нет.
Правильно - это как? Судя по логу, режим внешнего накопителя не включён.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 22:21 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
bizdelnick писал(а):
skan40 писал(а):
НАстройки смартфона, сделаны правильно. Еси терминал  видит, значит должен работать - но нет.
Правильно - это как? Судя по логу, режим внешнего накопителя не включён.


Если бы внешний накопитель не был включен - смартфон в данном случае, то он бы не выдал бы информацию  в трее - Синхронизация через USB мультимедиа данных. Но по скольку он выдал это - подключение к РС идёт.

Вообщем вот полные логи:
[Показать] Скрытый текст: Заголовок
dmesg

[Показать] Скрытый текст:
[    0.000000]   DMA32 zone: 894912 pages, LIFO batch:31
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 127008 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000df780000 - 00000000df7a3000
[    0.000000] PM: Registered nosave memory: 00000000df7a3000 - 00000000df7e0000
[    0.000000] PM: Registered nosave memory: 00000000df7e0000 - 00000000df800000
[    0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at df800000 (gap: df800000:14800000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011f400000 s81344 r8192 d21056 u262144
[    0.000000] pcpu-alloc: s81344 r8192 d21056 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1025834
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=8bfd658e-dfcf-4347-bd81-6f5c8178570a splash quiet resume=UUID=8fd86b5b-6610-40d9-953d-5cea9936ce48 vga=788
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4025144k/4710400k available (4467k kernel code, 533444k absent, 151812k reserved, 6414k data, 744k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2893.400 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.80 BogoMIPS (lpj=2893400)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000020] Security Framework initialized
[    0.000028] TOMOYO Linux initialized
[    0.000311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001316] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001734] Mount-cache hash table entries: 256
[    0.001825] Initializing cgroup subsys cpuacct
[    0.001827] Initializing cgroup subsys devices
[    0.001828] Initializing cgroup subsys freezer
[    0.001829] Initializing cgroup subsys net_cls
[    0.001831] Initializing cgroup subsys blkio
[    0.001853] CPU: Physical Processor ID: 0
[    0.001854] CPU: Processor Core ID: 0
[    0.001858] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001859] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001861] mce: CPU supports 9 MCE banks
[    0.001872] CPU0: Thermal monitoring enabled (TM1)
[    0.001880] using mwait in idle threads.
[    0.002874] ACPI: Checking initramfs for custom DSDT
[    0.058008] ACPI: Core revision 20120111
[    0.064175] ftrace: allocating 17215 entries in 68 pages
[    0.072344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.082320] CPU0: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz stepping 07
[    0.183756] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.183761] PEBS disabled due to CPU errata.
[    0.183762] ... version:                3
[    0.183763] ... bit width:              48
[    0.183764] ... generic registers:      8
[    0.183765] ... value mask:             0000ffffffffffff
[    0.183766] ... max period:             000000007fffffff
[    0.183767] ... fixed-purpose events:   3
[    0.183768] ... event mask:             00000007000000ff
[    0.183873] Booting Node   0, Processors  #1
[    0.183875] smpboot cpu 1: start_ip = 9a000
[    0.214964]  #2
[    0.214965] smpboot cpu 2: start_ip = 9a000
[    0.250255]  #3
[    0.250257] smpboot cpu 3: start_ip = 9a000
[    0.281297] Brought up 4 CPUs
[    0.281299] Total of 4 processors activated (23147.20 BogoMIPS).
[    0.283938] devtmpfs: initialized
[    0.284566] PM: Registering ACPI NVS region at df780000 (143360 bytes)
[    0.285087] RTC time: 22:02:57, date: 08/29/12
[    0.285110] NET: Registered protocol family 16
[    0.285195] ACPI: bus type pci registered
[    0.285240] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.285242] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.292001] PCI: Using configuration type 1 for base access
[    0.292293] bio: create slab <bio-0> at 0
[    0.292329] ACPI: Added _OSI(Module Device)
[    0.292330] ACPI: Added _OSI(Processor Device)
[    0.292332] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.292333] ACPI: Added _OSI(Processor Aggregator Device)
[    0.292825] ACPI: EC: Look up EC in DSDT
[    0.295539] ACPI Warning: Incorrect checksum in table [TAMG] - 0x59, should be 0x58 (20120111/tbutils-321)
[    0.295904] ACPI: Interpreter enabled
[    0.295907] ACPI: (supports S0 S3 S4 S5)
[    0.295917] ACPI: Using IOAPIC for interrupt routing
[    0.297917] ACPI: No dock devices found.
[    0.297920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.297954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.297994] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.297996] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.297997] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.297999] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.298000] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.298002] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
[    0.298022] PCI host bridge to bus 0000:00
[    0.298023] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.298025] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.298026] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.298028] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.298029] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.298030] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[    0.298037] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.298065] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.298089] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.298128] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.298150] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.298219] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.298250] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.298269] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[    0.298354] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.298377] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.298391] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[    0.298456] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.298476] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.298549] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.298574] pci 0000:00:1c.3: [8086:244e] type 1 class 0x000604
[    0.298647] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.298669] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.298742] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.298765] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.298839] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.298861] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[    0.298935] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.298958] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[    0.299031] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.299057] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.299076] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[    0.299161] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.299184] pci 0000:00:1f.0: [8086:1c46] type 0 class 0x000601
[    0.299298] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[    0.299311] pci 0000:00:1f.2: reg 10: [io  0xff00-0xff07]
[    0.299318] pci 0000:00:1f.2: reg 14: [io  0xfe00-0xfe03]
[    0.299325] pci 0000:00:1f.2: reg 18: [io  0xfd00-0xfd07]
[    0.299332] pci 0000:00:1f.2: reg 1c: [io  0xfc00-0xfc03]
[    0.299339] pci 0000:00:1f.2: reg 20: [io  0xfb00-0xfb0f]
[    0.299345] pci 0000:00:1f.2: reg 24: [io  0xfa00-0xfa0f]
[    0.299386] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.299399] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[    0.299419] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.299450] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[    0.299463] pci 0000:00:1f.5: reg 10: [io  0xf800-0xf807]
[    0.299470] pci 0000:00:1f.5: reg 14: [io  0xf700-0xf703]
[    0.299477] pci 0000:00:1f.5: reg 18: [io  0xf600-0xf607]
[    0.299483] pci 0000:00:1f.5: reg 1c: [io  0xf500-0xf503]
[    0.299490] pci 0000:00:1f.5: reg 20: [io  0xf400-0xf40f]
[    0.299497] pci 0000:00:1f.5: reg 24: [io  0xf300-0xf30f]
[    0.299557] pci 0000:01:00.0: [1002:68f9] type 0 class 0x000300
[    0.299568] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.299576] pci 0000:01:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[    0.299582] pci 0000:01:00.0: reg 20: [io  0xbe00-0xbeff]
[    0.299592] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.299617] pci 0000:01:00.0: supports D1 D2
[    0.299633] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[    0.299643] pci 0000:01:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[    0.299689] pci 0000:01:00.1: supports D1 D2
[    0.301452] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.301456] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.301460] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.301465] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.301522] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.301591] pci 0000:03:00.0: [1283:8892] type 1 class 0x000604
[    0.301746] pci 0000:03:00.0: supports D1 D2
[    0.301747] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.301775] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[    0.301779] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.301782] pci 0000:00:1c.3:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.301787] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.301789] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.301791] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.301792] pci 0000:00:1c.3:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.301794] pci 0000:00:1c.3:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.301795] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
[    0.301887] pci 0000:04:02.0: [1106:3044] type 0 class 0x000c00
[    0.301923] pci 0000:04:02.0: reg 10: [mem 0xfb9ff000-0xfb9ff7ff]
[    0.301943] pci 0000:04:02.0: reg 14: [io  0xef00-0xef7f]
[    0.302096] pci 0000:04:02.0: supports D2
[    0.302097] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
[    0.302191] pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.302202] pci 0000:03:00.0:   bridge window [io  0xe000-0xefff]
[    0.302208] pci 0000:03:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.302219] pci 0000:03:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.302220] pci 0000:03:00.0:   bridge window [mem 0xfb900000-0xfb9fffff] (subtractive decode)
[    0.302222] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.302224] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.302225] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.302227] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.302228] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.302230] pci 0000:03:00.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.302232] pci 0000:03:00.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.302233] pci 0000:03:00.0:   bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
[    0.302306] pci 0000:05:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.302332] pci 0000:05:00.0: reg 10: [mem 0xfbef8000-0xfbefffff 64bit]
[    0.302455] pci 0000:05:00.0: supports D1 D2
[    0.302456] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304448] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.304455] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.304535] pci 0000:06:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.304560] pci 0000:06:00.0: reg 10: [mem 0xfbdf8000-0xfbdfffff 64bit]
[    0.304681] pci 0000:06:00.0: supports D1 D2
[    0.304682] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.306442] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.306449] pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.306530] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[    0.306549] pci 0000:07:00.0: reg 10: [io  0xde00-0xdeff]
[    0.306581] pci 0000:07:00.0: reg 18: [mem 0xfbcff000-0xfbcfffff 64bit pref]
[    0.306602] pci 0000:07:00.0: reg 20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref]
[    0.306691] pci 0000:07:00.0: supports D1 D2
[    0.306692] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.308437] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.308442] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.308451] pci 0000:00:1c.6:   bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
[    0.308524] pci 0000:08:00.0: [1b4b:917a] type 0 class 0x000101
[    0.308540] pci 0000:08:00.0: reg 10: [io  0xcf00-0xcf07]
[    0.308552] pci 0000:08:00.0: reg 14: [io  0xce00-0xce03]
[    0.308564] pci 0000:08:00.0: reg 18: [io  0xcd00-0xcd07]
[    0.308576] pci 0000:08:00.0: reg 1c: [io  0xcc00-0xcc03]
[    0.308588] pci 0000:08:00.0: reg 20: [io  0xcb00-0xcb0f]
[    0.308600] pci 0000:08:00.0: reg 24: [mem 0xfbbff000-0xfbbff1ff]
[    0.308612] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.308670] pci 0000:08:00.0: PME# supported from D3hot
[    0.310429] pci 0000:00:1c.7: PCI bridge to [bus 08-08]
[    0.310433] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.310438] pci 0000:00:1c.7:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.310486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.310562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.310581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.310599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.310615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.310631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.310647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.310662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    0.310691]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.310693]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.310694] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.315115] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.315143] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.315170] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.315196] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.315222] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.315250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.315276] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.315302] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.315355] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.315357] vgaarb: loaded
[    0.315358] vgaarb: bridge control possible 0000:01:00.0
[    0.315390] PCI: Using ACPI for IRQ routing
[    0.316736] PCI: pci_cache_line_size set to 64 bytes
[    0.316810] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.316811] reserve RAM buffer: 00000000df780000 - 00000000dfffffff
[    0.316813] reserve RAM buffer: 000000011f800000 - 000000011fffffff
[    0.316870] NetLabel: Initializing
[    0.316871] NetLabel:  domain hash size = 128
[    0.316872] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.316879] NetLabel:  unlabeled traffic allowed by default
[    0.316890] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.316894] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.318902] Switching to clocksource hpet
[    0.322238] pnp: PnP ACPI init
[    0.322246] ACPI: bus type pnp registered
[    0.322290] pnp 00:00: [bus 00-3f]
[    0.322292] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.322293] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.322294] pnp 00:00: [io  0x0d00-0xffff window]
[    0.322296] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.322297] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.322300] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.322301] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[    0.322326] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.322373] pnp 00:01: [io  0x0010-0x001f]
[    0.322374] pnp 00:01: [io  0x0022-0x003f]
[    0.322376] pnp 00:01: [io  0x0044-0x004d]
[    0.322377] pnp 00:01: [io  0x0050-0x005f]
[    0.322378] pnp 00:01: [io  0x0062-0x0063]
[    0.322379] pnp 00:01: [io  0x0065-0x006f]
[    0.322380] pnp 00:01: [io  0x0074-0x007f]
[    0.322381] pnp 00:01: [io  0x0091-0x0093]
[    0.322382] pnp 00:01: [io  0x00a2-0x00bf]
[    0.322383] pnp 00:01: [io  0x00e0-0x00ef]
[    0.322385] pnp 00:01: [io  0x04d0-0x04d1]
[    0.322386] pnp 00:01: [io  0x0290-0x029f]
[    0.322387] pnp 00:01: [io  0x0800-0x0805]
[    0.322388] pnp 00:01: [io  0x0290-0x0294]
[    0.322389] pnp 00:01: [io  0x0880-0x088f]
[    0.322419] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.322420] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.322422] system 00:01: [io  0x0800-0x0805] has been reserved
[    0.322424] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.322425] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.322427] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322434] pnp 00:02: [dma 4]
[    0.322435] pnp 00:02: [io  0x0000-0x000f]
[    0.322437] pnp 00:02: [io  0x0080-0x0090]
[    0.322438] pnp 00:02: [io  0x0094-0x009f]
[    0.322439] pnp 00:02: [io  0x00c0-0x00df]
[    0.322453] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.322481] pnp 00:03: [irq 0 disabled]
[    0.322488] pnp 00:03: [irq 8]
[    0.322489] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.322502] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.322517] pnp 00:04: [io  0x0070-0x0073]
[    0.322531] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.322536] pnp 00:05: [io  0x0061]
[    0.322548] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.322553] pnp 00:06: [io  0x00f0-0x00ff]
[    0.322557] pnp 00:06: [irq 13]
[    0.322571] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.322725] pnp 00:07: [io  0x03f8-0x03ff]
[    0.322729] pnp 00:07: [irq 4]
[    0.322764] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.322791] pnp 00:08: [io  0x0060]
[    0.322792] pnp 00:08: [io  0x0064]
[    0.322796] pnp 00:08: [irq 12]
[    0.322809] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.322845] pnp 00:09: [io  0x0400-0x04cf]
[    0.322846] pnp 00:09: [io  0x04d2-0x04ff]
[    0.322870] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.322872] system 00:09: [io  0x04d2-0x04ff] has been reserved
[    0.322874] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322881] pnp 00:0a: [io  0x1000-0x107f]
[    0.322882] pnp 00:0a: [io  0x1080-0x10ff]
[    0.322883] pnp 00:0a: [io  0x1100-0x117f]
[    0.322885] pnp 00:0a: [io  0x1180-0x11ff]
[    0.322909] system 00:0a: [io  0x1000-0x107f] has been reserved
[    0.322910] system 00:0a: [io  0x1080-0x10ff] has been reserved
[    0.322912] system 00:0a: [io  0x1100-0x117f] has been reserved
[    0.322919] system 00:0a: [io  0x1180-0x11ff] has been reserved
[    0.322921] system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.323023] pnp 00:0b: [io  0x0454-0x0457]
[    0.323050] system 00:0b: [io  0x0454-0x0457] has been reserved
[    0.323052] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.323062] pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
[    0.323091] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.323093] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.323187] pnp 00:0d: [mem 0x000ce800-0x000cffff]
[    0.323188] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[    0.323189] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.323191] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.323192] pnp 00:0d: [mem 0xdf780000-0xdf7dffff]
[    0.323193] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.323194] pnp 00:0d: [mem 0x00100000-0xdf77ffff]
[    0.323196] pnp 00:0d: [mem 0xdf7e0000-0xdf7fffff]
[    0.323197] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.323198] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[    0.323199] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.323201] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.323202] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.323203] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.323204] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.323205] pnp 00:0d: [mem 0x20000000-0x201fffff]
[    0.323207] pnp 00:0d: [mem 0x40000000-0x400fffff]
[    0.323208] pnp 00:0d: [mem 0xdf800000-0xdfffffff]
[    0.323244] system 00:0d: [mem 0x000ce800-0x000cffff] has been reserved
[    0.323246] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.323247] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.323249] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.323251] system 00:0d: [mem 0xdf780000-0xdf7dffff] could not be reserved
[    0.323252] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.323254] system 00:0d: [mem 0x00100000-0xdf77ffff] could not be reserved
[    0.323256] system 00:0d: [mem 0xdf7e0000-0xdf7fffff] has been reserved
[    0.323257] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.323259] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.323261] system 00:0d: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.323262] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.323264] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.323266] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.323267] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.323269] system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
[    0.323271] system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
[    0.323272] system 00:0d: [mem 0xdf800000-0xdfffffff] could not be reserved
[    0.323274] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.323284] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    0.323304] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    0.323308] pnp: PnP ACPI: found 15 devices
[    0.323309] ACPI: ACPI bus type pnp unregistered
[    0.328965] PCI: max bus depth: 2 pci_try_num: 3
[    0.329027] pci 0000:00:1c.7: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
[    0.329029] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0100000-0xf02fffff]
[    0.329032] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0300000-0xf04fffff 64bit pref]
[    0.329034] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.329036] pci 0000:01:00.0: BAR 6: assigned [mem 0xfba00000-0xfba1ffff pref]
[    0.329038] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.329040] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.329042] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.329044] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.329047] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.329049] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.329054] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf02fffff]
[    0.329057] pci 0000:00:1c.0:   bridge window [mem 0xf0300000-0xf04fffff 64bit pref]
[    0.329062] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[    0.329066] pci 0000:03:00.0:   bridge window [io  0xe000-0xefff]
[    0.329075] pci 0000:03:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.329090] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.329093] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.329097] pci 0000:00:1c.3:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.329104] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.329108] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.329115] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.329119] pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.329127] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.329129] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.329135] pci 0000:00:1c.6:   bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
[    0.329141] pci 0000:08:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
[    0.329142] pci 0000:00:1c.7: PCI bridge to [bus 08-08]
[    0.329144] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.329149] pci 0000:00:1c.7:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.329152] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf00fffff pref]
[    0.329167] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.329188] pci 0000:03:00.0: setting latency timer to 64
[    0.329210] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.329211] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.329213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.329214] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.329216] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.329217] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff]
[    0.329218] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.329220] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.329221] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.329223] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.329224] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf02fffff]
[    0.329226] pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf04fffff 64bit pref]
[    0.329227] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.329229] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.329230] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.329231] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.329233] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.329234] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.329236] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.329237] pci_bus 0000:03: resource 9 [mem 0xe0000000-0xfebfffff]
[    0.329238] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.329240] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.329241] pci_bus 0000:04: resource 4 [io  0xe000-0xefff]
[    0.329243] pci_bus 0000:04: resource 5 [mem 0xfb900000-0xfb9fffff]
[    0.329244] pci_bus 0000:04: resource 8 [io  0x0000-0x0cf7]
[    0.329245] pci_bus 0000:04: resource 9 [io  0x0d00-0xffff]
[    0.329247] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[    0.329248] pci_bus 0000:04: resource 11 [mem 0x000c0000-0x000dffff]
[    0.329250] pci_bus 0000:04: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.329251] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfebfffff]
[    0.329253] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.329254] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.329256] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.329257] pci_bus 0000:07: resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref]
[    0.329259] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
[    0.329260] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.329261] pci_bus 0000:08: resource 2 [mem 0xf0000000-0xf00fffff pref]
[    0.329279] NET: Registered protocol family 2
[    0.329380] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.330054] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.331741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.331959] TCP: Hash tables configured (established 524288 bind 65536)
[    0.331961] TCP reno registered
[    0.331968] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.331987] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.332057] NET: Registered protocol family 1
[    0.353867] pci 0000:01:00.0: Boot video device
[    0.353966] PCI: CLS 4 bytes, default 64
[    0.354002] Trying to unpack rootfs image as initramfs...
[    0.415239] Freeing initrd memory: 6488k freed
[    0.415914] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.415918] Placing 64MB software IO TLB between ffff8800db77a000 - ffff8800df77a000
[    0.415919] software IO TLB at phys 0xdb77a000 - 0xdf77a000
[    0.416213] audit: initializing netlink socket (disabled)
[    0.416222] type=2000 audit(1346277777.249:1): initialized
[    0.427396] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.428570] VFS: Disk quotas dquot_6.5.2
[    0.428604] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.428703] msgmni has been set to 7874
[    0.428823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.428840] io scheduler noop registered
[    0.428841] io scheduler deadline registered
[    0.428870] io scheduler cfq registered (default)
[    0.428943] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.429197] vesafb: mode is 800x600x16, linelength=1600, pages=16
[    0.429198] vesafb: scrolling: redraw
[    0.429200] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.429411] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
[    0.440075] Console: switching to colour frame buffer device 100x37
[    0.450628] fb0: VESA VGA frame buffer device
[    0.450638] intel_idle: MWAIT substates: 0x1120
[    0.450639] intel_idle: v0.4 model 0x2A
[    0.450640] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.450662] GHES: HEST is not enabled!
[    0.450690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.471184] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.491852] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.491996] Linux agpgart interface v0.103
[    0.492798] brd: module loaded
[    0.492853] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    0.492854] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.493216] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.493219] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.493274] mousedev: PS/2 mouse device common for all mice
[    0.493327] rtc_cmos 00:04: RTC can wake from S4
[    0.493411] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.493436] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.493486] cpuidle: using governor ladder
[    0.493536] cpuidle: using governor menu
[    0.493647] TCP cubic registered
[    0.493649] Registering the dns_resolver key type
[    0.493716] PM: Checking hibernation image partition UUID=8fd86b5b-6610-40d9-953d-5cea9936ce48
[    1.415167] Refined TSC clocksource calibration: 2893.427 MHz.
[    1.415173] Switching to clocksource tsc
[    1.454805] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input0
[    1.457877] PM: Hibernation image not present or could not be loaded.
[    1.457886] registered taskstats version 1
[    1.458296]   Magic number: 8:488:48
[    1.458367] rtc_cmos 00:04: setting system clock to 2012-08-29 22:02:58 UTC (1346277778)
[    1.458369] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    1.459370] Freeing unused kernel memory: 744k freed
[    1.459446] Write protecting the kernel read-only data: 10240k
[    1.462885] Freeing unused kernel memory: 1660k freed
[    1.466935] Freeing unused kernel memory: 1996k freed
[    1.488654] SCSI subsystem initialized
[    1.497235] libata version 3.00 loaded.
[    1.499651] ahci 0000:08:00.0: version 3.0
[    1.499718] ahci 0000:08:00.0: irq 41 for MSI/MSI-X
[    1.499776] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[    1.499778] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.499981] scsi0 : ahci
[    1.500066] scsi1 : ahci
[    1.500089] ata1: SATA max UDMA/133 abar m512@0xfbbff000 port 0xfbbff100 irq 41
[    1.500092] ata2: SATA max UDMA/133 abar m512@0xfbbff000 port 0xfbbff180 irq 41
[    1.804182] ata1: SATA link down (SStatus 0 SControl 300)
[    1.804218] ata2: SATA link down (SStatus 0 SControl 300)
[    1.806555] ata_piix 0000:00:1f.2: version 2.13
[    1.806565] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.806597] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.806739] scsi2 : ata_piix
[    1.806778] scsi3 : ata_piix
[    1.807055] ata3: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19
[    1.807060] ata4: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19
[    1.807075] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.807101] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.807245] scsi4 : ata_piix
[    1.807312] scsi5 : ata_piix
[    1.807505] ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[    1.807508] ata6: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[    2.122135] ata6: SATA link down (SStatus 0 SControl 300)
[    2.132938] ata5: SATA link down (SStatus 0 SControl 300)
[    2.434382] ata3.00: SATA link down (SStatus 0 SControl 300)
[    2.434395] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.565288] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.565311] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.571676] ata4.00: ATA-8: ST3250318AS, CC38, max UDMA/133
[    2.571681] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.571689] ata4.01: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
[    2.577663] ata4.00: configured for UDMA/133
[    2.583398] ata4.01: configured for UDMA/100
[    2.584224] scsi 3:0:0:0: Direct-Access     ATA      ST3250318AS      CC38 PQ: 0 ANSI: 5
[    2.585013] scsi 3:0:1:0: CD-ROM            Optiarc  DVD RW AD-5280S  1.01 PQ: 0 ANSI: 5


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 22:24 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
В продолжение:

[Показать] Скрытый текст:
[    2.587852] dracut: dracut-017-16.mga2
[    2.607914] udevd[110]: starting version 181
[    2.626110] [drm] Initialized drm 1.1.0 20060810
[    2.661505] [drm] radeon defaulting to kernel modesetting.
[    2.661507] [drm] radeon kernel modesetting enabled.
[    2.661543] checking generic (e0000000 1000000) vs hw (e0000000 10000000)
[    2.661544] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.661556] Console: switching to colour dummy device 80x25
[    2.661806] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340).
[    2.661832] [drm] register mmio base: 0xFBAC0000
[    2.661833] [drm] register mmio size: 131072
[    2.661973] ATOM BIOS: 113
[    2.662039] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.662041] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.662045] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    2.662046] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.662047] [drm] RAM width 64bits DDR
[    2.662103] [TTM] Zone  kernel: Available graphics memory: 2018016 kiB.
[    2.662104] [TTM] Initializing pool allocator.
[    2.662107] [TTM] Initializing DMA pool allocator.
[    2.662119] [drm] radeon: 1024M of VRAM memory ready
[    2.662120] [drm] radeon: 512M of GTT memory ready.
[    2.662127] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.662128] [drm] Driver supports precise vblank timestamp query.
[    2.662157] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[    2.662163] radeon 0000:01:00.0: radeon: using MSI.
[    2.662191] [drm] radeon: irq initialized.
[    2.662194] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.662510] [drm] radeon: ib pool ready.
[    2.662558] [drm] Loading CEDAR Microcode
[    2.664868] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    2.664963] radeon 0000:01:00.0: WB enabled
[    2.664965] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff8801179f4c00
[    2.681271] [drm] ring test on 0 succeeded in 1 usecs
[    2.681446] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.681591] [drm] Radeon Display Connectors
[    2.681592] [drm] Connector 0:
[    2.681593] [drm]   HDMI-A
[    2.681593] [drm]   HPD1
[    2.681595] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.681596] [drm]   Encoders:
[    2.681597] [drm]     DFP1: INTERNAL_UNIPHY1
[    2.681597] [drm] Connector 1:
[    2.681598] [drm]   DVI-I
[    2.681599] [drm]   HPD4
[    2.681600] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    2.681601] [drm]   Encoders:
[    2.681602] [drm]     DFP2: INTERNAL_UNIPHY
[    2.681603] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.681604] [drm] Connector 2:
[    2.681605] [drm]   VGA
[    2.681606] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.681607] [drm]   Encoders:
[    2.681608] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.681634] [drm] Internal thermal controller with fan control
[    2.681654] [drm] radeon: power management initialized
[    2.737844] [drm] fb mappable at 0xE0142000
[    2.737846] [drm] vram apper at 0xE0000000
[    2.737847] [drm] size 5324800
[    2.737848] [drm] fb depth is 24
[    2.737848] [drm]    pitch is 5888
[    2.737905] fbcon: radeondrmfb (fb0) is primary device
[    2.942381] Console: switching to colour frame buffer device 180x56
[    2.944286] fb0: radeondrmfb frame buffer device
[    2.944287] drm: registered panic notifier
[    2.944293] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
[    2.965407] dracut: Starting plymouth daemon
[    3.692956] usbcore: registered new interface driver usbfs
[    3.692971] usbcore: registered new interface driver hub
[    3.692996] usbcore: registered new device driver usb
[    3.696115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.696155] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.696158] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    3.696173] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.696196] ehci_hcd 0000:00:1a.0: debug port 2
[    3.700079] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[    3.700103] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    3.700187] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    3.700189] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.700206] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.700230] sd 3:0:0:0: [sda] Write Protect is off
[    3.700231] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.700242] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.700461] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    3.705250] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.705269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.705271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.705272] usb usb1: Product: EHCI Host Controller
[    3.705274] usb usb1: Manufacturer: Linux 3.3.8-desktop-2.mga2 ehci_hcd
[    3.705275] usb usb1: SerialNumber: 0000:00:1a.0
[    3.705354] hub 1-0:1.0: USB hub found
[    3.705358] hub 1-0:1.0: 2 ports detected
[    3.705517] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.705520] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    3.705526] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.705546] ehci_hcd 0000:00:1d.0: debug port 2
[    3.709423] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[    3.709537] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    3.711546] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.711554] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    3.711670] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfbef8000
[    3.711740] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[    3.711799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.711800] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711802] usb usb3: Product: xHCI Host Controller
[    3.711803] usb usb3: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.711804] usb usb3: SerialNumber: 0000:05:00.0
[    3.711854] xHCI xhci_add_endpoint called for root hub
[    3.711855] xHCI xhci_check_bandwidth called for root hub
[    3.711873] hub 3-0:1.0: USB hub found
[    3.711880] hub 3-0:1.0: 2 ports detected
[    3.711921] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.711925] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    3.711937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.711939] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711940] usb usb4: Product: xHCI Host Controller
[    3.711942] usb usb4: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.711943] usb usb4: SerialNumber: 0000:05:00.0
[    3.711980] xHCI xhci_add_endpoint called for root hub
[    3.711981] xHCI xhci_check_bandwidth called for root hub
[    3.711996] hub 4-0:1.0: USB hub found
[    3.712002] hub 4-0:1.0: 2 ports detected
[    3.715279] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    3.715296] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    3.715413] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfbdf8000
[    3.715480] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[    3.715538] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.715539] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.715541] usb usb5: Product: xHCI Host Controller
[    3.715542] usb usb5: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.715543] usb usb5: SerialNumber: 0000:06:00.0
[    3.715653] xHCI xhci_add_endpoint called for root hub
[    3.715655] xHCI xhci_check_bandwidth called for root hub
[    3.715674] hub 5-0:1.0: USB hub found
[    3.715681] hub 5-0:1.0: 2 ports detected
[    3.715718] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    3.715722] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    3.715735] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.715737] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.715738] usb usb6: Product: xHCI Host Controller
[    3.715739] usb usb6: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.715741] usb usb6: SerialNumber: 0000:06:00.0
[    3.715855] xHCI xhci_add_endpoint called for root hub
[    3.715857] xHCI xhci_check_bandwidth called for root hub
[    3.715878] hub 6-0:1.0: USB hub found
[    3.715884] hub 6-0:1.0: 2 ports detected
[    3.716222] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.716243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.716246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.716249] usb usb2: Product: EHCI Host Controller
[    3.716251] usb usb2: Manufacturer: Linux 3.3.8-desktop-2.mga2 ehci_hcd
[    3.716254] usb usb2: SerialNumber: 0000:00:1d.0
[    3.716353] hub 2-0:1.0: USB hub found
[    3.716356] hub 2-0:1.0: 2 ports detected
[    3.740267] firewire_ohci: Added fw-ohci device 0000:04:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    3.770597]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    3.771228] sd 3:0:0:0: [sda] Attached SCSI disk
[    4.006503] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    4.120564] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    4.120569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.120863] hub 1-1:1.0: USB hub found
[    4.120947] hub 1-1:1.0: 6 ports detected
[    4.222920] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    4.240027] firewire_core: created device fw0: GUID 0049e5502b8a0000, S400
[    4.337007] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    4.337012] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.337270] hub 2-1:1.0: USB hub found
[    4.337374] hub 2-1:1.0: 8 ports detected
[    4.411611] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[    4.421933] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    4.421936] PM: Marking nosave pages: 00000000df780000 - 0000000100000000
[    4.422214] PM: Basic memory bitmaps created
[    4.433845] PM: Basic memory bitmaps freed
[    4.435735] PM: Starting manual resume from disk
[    4.435738] PM: Hibernation image partition 8:6 present
[    4.435739] PM: Looking for hibernation image.
[    4.475085] PM: Image not found (code -22)
[    4.475088] PM: Hibernation image not present or could not be loaded.
[    4.507571] usb 1-1.2: New USB device found, idVendor=1a5c, idProduct=3112
[    4.507575] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.507579] usb 1-1.2: Product: Speed Wheel 5 PRO
[    4.507581] usb 1-1.2: Manufacturer: A⁒䬀䤀一伀 
[    4.522288] input: A⁒䬀䤀一伀  Speed Wheel 5 PRO as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[    4.522394] generic-usb 0003:1A5C:3112.0001: input,hidraw0: USB HID v1.00 Joystick [A⁒䬀䤀一伀  Speed Wheel 5 PRO] on usb-0000:00:1a.0-1.2/input0
[    4.522405] usbcore: registered new interface driver usbhid
[    4.522406] usbhid: USB HID core driver
[    4.581177] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[    4.588194] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.642660] dracut: Checking ext4: /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a
[    4.642691] dracut: issuing e2fsck -a  /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a
[    4.689958] dracut: /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a: clean, 166117/2793472 files, 1672761/11157226 blocks
[    4.690112] dracut: Remounting /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a with -o acl,noatime,ro
[    4.733526] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
[    4.809641] dracut: Mounted root filesystem /dev/sda5
[    4.885971] usb 1-1.3: New USB device found, idVendor=046d, idProduct=0825
[    4.885975] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    4.885979] usb 1-1.3: SerialNumber: 32BFE2A0
[    4.959197] usb 1-1.5: new low-speed USB device number 5 using ehci_hcd
[    5.058360] usb 1-1.5: New USB device found, idVendor=04d9, idProduct=1203
[    5.058365] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.067557] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
[    5.067617] generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:1a.0-1.5/input0
[    5.082567] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input3
[    5.082661] generic-usb 0003:04D9:1203.0003: input,hidraw2: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:1a.0-1.5/input1
[    5.121468] dracut: Switching root
[    5.122228] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    5.155680] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[    5.242998] usb 2-1.1: New USB device found, idVendor=058f, idProduct=6364
[    5.243002] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.243006] usb 2-1.1: Product: Mass Storage Device
[    5.243008] usb 2-1.1: Manufacturer: Generic
[    5.243010] usb 2-1.1: SerialNumber: 058F63646476
[    5.244461] generic-usb 0003:058F:6364.0004: hiddev0,hidraw3: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.0-1.1/input1
[    5.727888] NET: Registered protocol family 10
[    6.907341] udevd[303]: starting version 181
[    7.109260] EXT4-fs (sda5): re-mounted. Opts: acl
[    8.537395] Non-volatile memory driver v1.3
[    9.571393] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    9.571445] ACPI: Power Button [PWRB]
[    9.571489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    9.571534] ACPI: Power Button [PWRF]
[    9.725893] iTCO_vendor_support: vendor-support=0
[    9.748575] wmi: Mapper loaded
[    9.765118] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    9.765343] mei 0000:00:16.0: setting latency timer to 64
[    9.765390] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[    9.842730] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    9.842789] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    9.990886] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   10.202128] hda_codec: ALC889: BIOS auto-probing.
[   10.202131] SKU: Nid=0x1d sku_cfg=0x4005e601
[   10.202132] SKU: port_connectivity=0x1
[   10.202133] SKU: enable_pcbeep=0x0
[   10.202134] SKU: check_sum=0x00000005
[   10.202135] SKU: customization=0x000000e6
[   10.202136] SKU: external_amp=0x0
[   10.202136] SKU: platform_type=0x0
[   10.202137] SKU: swap=0x0
[   10.202138] SKU: override=0x1
[   10.202141] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   10.202143]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.202144]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.202145]    mono: mono_out=0x0
[   10.202145]    dig-out=0x11/0x1e
[   10.202146]    inputs: Rear Mic=0x18 Front Mic=0x19 Line=0x1a
[   10.204826] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   10.204828] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   10.211100] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.211153] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.211193] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.211232] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.211264] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.211297] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.211331] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.211365] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.212308] hda-intel: Using LPIB position fix
[   10.212367] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   10.215573] hda-intel: Enable sync_write for stable communication
[   10.231954] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.232082] r8169 0000:07:00.0: irq 48 for MSI/MSI-X
[   10.232341] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000509e000, 50:e5:49:34:52:fa, XID 0c900800 IRQ 48
[   10.232344] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.245977] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   10.246030] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   10.925854] Linux media interface: v0.10
[   10.934672] Linux video capture interface: v2.00
[   11.004322] usbcore: registered new interface driver uas
[   11.007983] Initializing USB Mass Storage driver...
[   11.008091] scsi6 : usb-storage 2-1.1:1.0
[   11.008134] usbcore: registered new interface driver usb-storage
[   11.008135] USB Mass Storage support registered.
[   11.807595] 4:3:1: cannot set freq 16000 to ep 0x86
[   11.945064] current rate 290 is different from the runtime rate 24000
[   11.954304] 5:2: cannot get min/max values for control 2 (id 5)
[   11.954490] usbcore: registered new interface driver snd-usb-audio
[   11.954522] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[   11.968763] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
[   11.968825] usbcore: registered new interface driver uvcvideo
[   11.968827] USB Video Class driver (1.1.1)
[   12.008668] scsi 6:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[   12.010910] scsi 6:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[   12.012891] scsi 6:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[   12.015758] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[   12.034471] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   12.037468] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   12.039834] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   12.040629] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   13.104614] Adding 4175868k swap on /dev/sda6.  Priority:0 extents:1 across:4175868k
[   13.352204] device-mapper: uevent: version 1.0.3
[   13.352272] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   13.503460] fuse init (API version 7.18)
[   16.027762] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[   16.027777] REISERFS (device sda7): using ordered data mode
[   16.027780] reiserfs: using flush barriers
[   16.037818] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   16.038041] REISERFS (device sda7): checking transaction log (sda7)
[   16.234649] REISERFS (device sda7): Using r5 hash to sort names
[   20.697860] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[   20.698215] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[   20.698372] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[   20.698520] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[   20.698685] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   20.723446] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[   20.724071] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[   20.724534] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[   20.725005] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[   20.727464] microcode: Microcode Update Driver: v2.00 removed.
[   21.162266] r8169 0000:07:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[   21.172429] r8169 0000:07:00.0: eth0: link down
[   21.172440] r8169 0000:07:00.0: eth0: link down
[   21.172707] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.187711] Bluetooth: Core ver 2.16
[   21.187724] NET: Registered protocol family 31
[   21.187726] Bluetooth: HCI device and connection manager initialized
[   21.187728] Bluetooth: HCI socket layer initialized
[   21.187729] Bluetooth: L2CAP socket layer initialized
[   21.187732] Bluetooth: SCO socket layer initialized
[   21.189982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.189984] Bluetooth: BNEP filters: protocol multicast
[   21.567902] ata4.00: configured for UDMA/133
[   21.573700] ata4.01: configured for UDMA/100
[   21.573707] ata4: EH complete
[   22.438240] EXT4-fs (sda5): re-mounted. Opts: acl,commit=0
[   22.588124] radeon 0000:01:00.0: evergreen_cs_track_validate_texture:835 texture bo too small (layer size 5529600, offset 0, max layer 1, depth 1, bo size 5300224) (1536 900)
[   22.588127] [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
[   22.876843] r8169 0000:07:00.0: eth0: link up
[   22.877069] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.889927] NET: Registered protocol family 17
[   24.376792] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.466072] FS-Cache: Loaded
[   24.479504] RPC: Registered named UNIX socket transport module.
[   24.479506] RPC: Registered udp transport module.
[   24.479507] RPC: Registered tcp transport module.
[   24.479508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.501089] FS-Cache: Netfs 'nfs' registered for caching
[   24.528811] Netfilter messages via NETLINK v0.30.
[   24.535922] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   24.548776] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   24.561699] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   24.581521] NFSD: starting 90-second grace period
[   24.585852] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.586122] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   24.586124] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   24.604611] ctnetlink v0.93: registering with nfnetlink.
[   24.651139] ip_set: protocol 6
[   24.659793] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   24.875549] xt_time: kernel timezone is +0400
[   24.955447] Bridge firewalling registered
[   25.035137] u32 classifier
[   25.035139]     Actions configured
[   25.762543] netfilter PSD loaded - (c) astaro AG
[   25.763897] IFWLOG: register target
[   26.963863] ppdev: user-space parallel port driver
[   26.965540] ppdev0: no associated port!
[   33.442969] eth0: no IPv6 routers present
[   74.096845] usb 1-1.1: new high-speed USB device number 6 using ehci_hcd
[   74.182618] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c
[   74.182620] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   74.182622] usb 1-1.1: Product: LG-P705
[   74.182623] usb 1-1.1: Manufacturer: LGE
[   74.182624] usb 1-1.1: SerialNumber: LGOTMS6fd27b3


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 23:16 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
skan40 писал(а):
Если бы внешний накопитель не был включен - смартфон в данном случае, то он бы не выдал бы информацию  в трее - Синхронизация через USB мультимедиа данных. Но по скольку он выдал это - подключение к РС идёт.
Синхронизация по какому протоколу имеется в виду, Вы в курсе? Я нет. Но по идее должен быть отдельный режим внешнего накопителя (если его из 4 Андроида не выпилили, конечно). Ковыряйте настройки смарта.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 23:38 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
Синхронизация по MTP.  Режим внешнего накопителя, о котором вы говорите - это и есть - стандарное usb соединение, еси бы этого режима не было, то и к винде бы не подсоеденился.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 30 авг 2012 00:24 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
skan40 писал(а):
Синхронизация по MTP.  Режим внешнего накопителя, о котором вы говорите - это и есть - стандарное usb соединение, еси бы этого режима не было, то и к винде бы не подсоеденился.
А что, бывают нестандартные USB-соединения?
Ещё раз: синхронизация по MTP, если там MTP, и работа в режиме USB-накопителя - это разные вещи. Ищите, где они переключаются, если переключаются.

Upd. Как вариант - попробовать использовать mtpfs. В Мандриве есть в contrib, за Магею не скажу. Ещё есть какой-то devicesync.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 30 авг 2012 05:42 
Аватара пользователя

Зарегистрирован: 03 мар 2010 06:52
Сообщения: 1559
Смарт монтируется как стандартный USB накопитель, что в третьем, что в четвертом Андроиде. И видит его комп что в Мандриве, что Арче - одинаково.
Нужно не забывать вытаскивать на смарте статусные сообщения, тыкать в строку "USB соединение установлено", потом ткнуть в кнопку "Подключить как USB накопитель", подтвердить что это действительно нужно, потом на компе примонтировать появившийся накопитель.


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 23 ]  На страницу 1, 2, 3  След.

Часовой пояс: UTC + 3 часа [ Летнее время ]


Кто сейчас на конференции

Сейчас этот форум просматривают: Google [Bot]


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Русская поддержка phpBB