EduMandriva

форум российского сообщества Edumandriva

Форум предназначен для обсуждения вопросов проекта Edumandriva. По вопросам дистрибутивов Mandriva и РОСА просьба обращаться на forum.rosalab.ru, unixforum.org и linuxforum.ru

Текущее время: 01 апр 2020 15:39

Часовой пояс: UTC + 3 часа [ Летнее время ]




Начать новую тему Ответить на тему  [ Сообщений: 23 ]  На страницу 1, 2, 3  След.
Автор Сообщение
 Заголовок сообщения: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia2)
СообщениеДобавлено: 29 авг 2012 00:55 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
Прошу прощения, что не по Mandriva, но всё же это родственный дистрибутив.

Не монтируется смартфон LG Optimus L7 - операционная система Android ICS или точнее - Google Android на базе Android 4.0, ядро 3.0.8 - обновление до 4.0.3  ( приобрёл я его в связи с потерей MOTOROLA Milestine XT720 - монтировался с ходу, андроид 2.1.1).

Собственно - все устройства внешние монтируются, а LG  никак. В терминале он определяется..
команда:
lsusb
Код:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 1a5c:3112  
Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 005: ID 04d9:1203 Holtek Semiconductor, Inc. Keyboard
Bus 002 Device 003: ID 058f:6364 Alcor Micro Corp. Hi-Speed 7-in-1 Flash Card Reader/Writer [Sabrent]
Bus 002 Device 007: ID 1004:631c LG Electronics, Inc.


На команду dmesg, выдаёт кучу информации, приведу только самые нижние:
dmesg:


Код:
[  175.828213] usb 2-1.2: Product: LG-P705
[  175.828215] usb 2-1.2: Manufacturer: LGE
[  175.828217] usb 2-1.2: SerialNumber: LGOTMS6fd27b3
[  763.365703] usb 2-1.2: USB disconnect, device number 5
[ 7842.676392] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd
[ 7842.762508] usb 2-1.2: New USB device found, idVendor=1004, idProduct=631c
[ 7842.762513] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 7842.762516] usb 2-1.2: Product: LG-P705
[ 7842.762518] usb 2-1.2: Manufacturer: LGE
[ 7842.762520] usb 2-1.2: SerialNumber: LGOTMS6fd27b3
[10785.329521] usb 2-1.2: USB disconnect, device number 6
[11082.470074] usb 2-1.3: new high-speed USB device number 7 using ehci_hcd
[11082.556354] usb 2-1.3: New USB device found, idVendor=1004, idProduct=631c
[11082.556358] usb 2-1.3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[11082.556361] usb 2-1.3: Product: LG-P705
[11082.556364] usb 2-1.3: Manufacturer: LGE
[11082.556366] usb 2-1.3: SerialNumber: LGOTMS6fd27b3


Тут даже модель видна, но на этом и всё. Смартфон при подключении, показывает, что происходит синхронизация мультимедия, но ничего не происходит. PcmanFM - ничего...

ТОлько что пробовал на нетбуке ASUS EeePC 1015 PN  с установленным MINT 13- результат тот же. НАстройки смартфона, сделаны правильно. Еси терминал  видит, значит должен работать - но нет. Потскажите пожалста.

В терминале не силён, но  по подсказкам могу сделать.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 14:36 

Зарегистрирован: 19 окт 2010 14:51
Сообщения: 105
А что собственно от смартфона требуется-то?


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 15:46 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
Ну наверно я не буду качать фильм с трекера смартфоном (понятно наверное, что таким образом моих 200р. не хватит на счету) - проще наверно скачать на РС, переконвертировать и закачать на карту памяти в смартфоне. Кончно можно вынуть карту и через картридер закачать, но проблема заключается как раз в том, что достать карту из смартфона можно только сняв заднюю крышку. К сожалению это не есть гут, в противном случае износятся крепления и крышка начнёт сама отваливаться.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 17:05 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
skan40 писал(а):
НАстройки смартфона, сделаны правильно. Еси терминал  видит, значит должен работать - но нет.
Правильно - это как? Судя по логу, режим внешнего накопителя не включён.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 22:21 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
bizdelnick писал(а):
skan40 писал(а):
НАстройки смартфона, сделаны правильно. Еси терминал  видит, значит должен работать - но нет.
Правильно - это как? Судя по логу, режим внешнего накопителя не включён.


Если бы внешний накопитель не был включен - смартфон в данном случае, то он бы не выдал бы информацию  в трее - Синхронизация через USB мультимедиа данных. Но по скольку он выдал это - подключение к РС идёт.

Вообщем вот полные логи:
[Показать] Скрытый текст: Заголовок
dmesg

[Показать] Скрытый текст:
[    0.000000]   DMA32 zone: 894912 pages, LIFO batch:31
[    0.000000]   Normal zone: 2016 pages used for memmap
[    0.000000]   Normal zone: 127008 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000df780000 - 00000000df7a3000
[    0.000000] PM: Registered nosave memory: 00000000df7a3000 - 00000000df7e0000
[    0.000000] PM: Registered nosave memory: 00000000df7e0000 - 00000000df800000
[    0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at df800000 (gap: df800000:14800000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011f400000 s81344 r8192 d21056 u262144
[    0.000000] pcpu-alloc: s81344 r8192 d21056 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1025834
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=8bfd658e-dfcf-4347-bd81-6f5c8178570a splash quiet resume=UUID=8fd86b5b-6610-40d9-953d-5cea9936ce48 vga=788
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4025144k/4710400k available (4467k kernel code, 533444k absent, 151812k reserved, 6414k data, 744k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 2893.400 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.80 BogoMIPS (lpj=2893400)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000020] Security Framework initialized
[    0.000028] TOMOYO Linux initialized
[    0.000311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001316] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001734] Mount-cache hash table entries: 256
[    0.001825] Initializing cgroup subsys cpuacct
[    0.001827] Initializing cgroup subsys devices
[    0.001828] Initializing cgroup subsys freezer
[    0.001829] Initializing cgroup subsys net_cls
[    0.001831] Initializing cgroup subsys blkio
[    0.001853] CPU: Physical Processor ID: 0
[    0.001854] CPU: Processor Core ID: 0
[    0.001858] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001859] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001861] mce: CPU supports 9 MCE banks
[    0.001872] CPU0: Thermal monitoring enabled (TM1)
[    0.001880] using mwait in idle threads.
[    0.002874] ACPI: Checking initramfs for custom DSDT
[    0.058008] ACPI: Core revision 20120111
[    0.064175] ftrace: allocating 17215 entries in 68 pages
[    0.072344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.082320] CPU0: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz stepping 07
[    0.183756] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[    0.183761] PEBS disabled due to CPU errata.
[    0.183762] ... version:                3
[    0.183763] ... bit width:              48
[    0.183764] ... generic registers:      8
[    0.183765] ... value mask:             0000ffffffffffff
[    0.183766] ... max period:             000000007fffffff
[    0.183767] ... fixed-purpose events:   3
[    0.183768] ... event mask:             00000007000000ff
[    0.183873] Booting Node   0, Processors  #1
[    0.183875] smpboot cpu 1: start_ip = 9a000
[    0.214964]  #2
[    0.214965] smpboot cpu 2: start_ip = 9a000
[    0.250255]  #3
[    0.250257] smpboot cpu 3: start_ip = 9a000
[    0.281297] Brought up 4 CPUs
[    0.281299] Total of 4 processors activated (23147.20 BogoMIPS).
[    0.283938] devtmpfs: initialized
[    0.284566] PM: Registering ACPI NVS region at df780000 (143360 bytes)
[    0.285087] RTC time: 22:02:57, date: 08/29/12
[    0.285110] NET: Registered protocol family 16
[    0.285195] ACPI: bus type pci registered
[    0.285240] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.285242] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.292001] PCI: Using configuration type 1 for base access
[    0.292293] bio: create slab <bio-0> at 0
[    0.292329] ACPI: Added _OSI(Module Device)
[    0.292330] ACPI: Added _OSI(Processor Device)
[    0.292332] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.292333] ACPI: Added _OSI(Processor Aggregator Device)
[    0.292825] ACPI: EC: Look up EC in DSDT
[    0.295539] ACPI Warning: Incorrect checksum in table [TAMG] - 0x59, should be 0x58 (20120111/tbutils-321)
[    0.295904] ACPI: Interpreter enabled
[    0.295907] ACPI: (supports S0 S3 S4 S5)
[    0.295917] ACPI: Using IOAPIC for interrupt routing
[    0.297917] ACPI: No dock devices found.
[    0.297920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.297954] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.297994] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.297996] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[    0.297997] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.297999] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[    0.298000] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.298002] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff]
[    0.298022] PCI host bridge to bus 0000:00
[    0.298023] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.298025] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.298026] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.298028] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.298029] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.298030] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff]
[    0.298037] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    0.298065] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.298089] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.298128] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.298150] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[    0.298219] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.298250] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.298269] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[    0.298354] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.298377] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.298391] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
[    0.298456] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.298476] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.298549] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.298574] pci 0000:00:1c.3: [8086:244e] type 1 class 0x000604
[    0.298647] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.298669] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.298742] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.298765] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.298839] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.298861] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604
[    0.298935] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.298958] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[    0.299031] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.299057] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.299076] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[    0.299161] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.299184] pci 0000:00:1f.0: [8086:1c46] type 0 class 0x000601
[    0.299298] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[    0.299311] pci 0000:00:1f.2: reg 10: [io  0xff00-0xff07]
[    0.299318] pci 0000:00:1f.2: reg 14: [io  0xfe00-0xfe03]
[    0.299325] pci 0000:00:1f.2: reg 18: [io  0xfd00-0xfd07]
[    0.299332] pci 0000:00:1f.2: reg 1c: [io  0xfc00-0xfc03]
[    0.299339] pci 0000:00:1f.2: reg 20: [io  0xfb00-0xfb0f]
[    0.299345] pci 0000:00:1f.2: reg 24: [io  0xfa00-0xfa0f]
[    0.299386] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.299399] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[    0.299419] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
[    0.299450] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[    0.299463] pci 0000:00:1f.5: reg 10: [io  0xf800-0xf807]
[    0.299470] pci 0000:00:1f.5: reg 14: [io  0xf700-0xf703]
[    0.299477] pci 0000:00:1f.5: reg 18: [io  0xf600-0xf607]
[    0.299483] pci 0000:00:1f.5: reg 1c: [io  0xf500-0xf503]
[    0.299490] pci 0000:00:1f.5: reg 20: [io  0xf400-0xf40f]
[    0.299497] pci 0000:00:1f.5: reg 24: [io  0xf300-0xf30f]
[    0.299557] pci 0000:01:00.0: [1002:68f9] type 0 class 0x000300
[    0.299568] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.299576] pci 0000:01:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit]
[    0.299582] pci 0000:01:00.0: reg 20: [io  0xbe00-0xbeff]
[    0.299592] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.299617] pci 0000:01:00.0: supports D1 D2
[    0.299633] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[    0.299643] pci 0000:01:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit]
[    0.299689] pci 0000:01:00.1: supports D1 D2
[    0.301452] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.301456] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.301460] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.301465] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.301522] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.301591] pci 0000:03:00.0: [1283:8892] type 1 class 0x000604
[    0.301746] pci 0000:03:00.0: supports D1 D2
[    0.301747] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.301775] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[    0.301779] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.301782] pci 0000:00:1c.3:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.301787] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.301789] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.301791] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.301792] pci 0000:00:1c.3:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.301794] pci 0000:00:1c.3:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.301795] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
[    0.301887] pci 0000:04:02.0: [1106:3044] type 0 class 0x000c00
[    0.301923] pci 0000:04:02.0: reg 10: [mem 0xfb9ff000-0xfb9ff7ff]
[    0.301943] pci 0000:04:02.0: reg 14: [io  0xef00-0xef7f]
[    0.302096] pci 0000:04:02.0: supports D2
[    0.302097] pci 0000:04:02.0: PME# supported from D2 D3hot D3cold
[    0.302191] pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.302202] pci 0000:03:00.0:   bridge window [io  0xe000-0xefff]
[    0.302208] pci 0000:03:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.302219] pci 0000:03:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.302220] pci 0000:03:00.0:   bridge window [mem 0xfb900000-0xfb9fffff] (subtractive decode)
[    0.302222] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.302224] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.302225] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.302227] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.302228] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.302230] pci 0000:03:00.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.302232] pci 0000:03:00.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[    0.302233] pci 0000:03:00.0:   bridge window [mem 0xe0000000-0xfebfffff] (subtractive decode)
[    0.302306] pci 0000:05:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.302332] pci 0000:05:00.0: reg 10: [mem 0xfbef8000-0xfbefffff 64bit]
[    0.302455] pci 0000:05:00.0: supports D1 D2
[    0.302456] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.304448] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.304455] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.304535] pci 0000:06:00.0: [1b6f:7023] type 0 class 0x000c03
[    0.304560] pci 0000:06:00.0: reg 10: [mem 0xfbdf8000-0xfbdfffff 64bit]
[    0.304681] pci 0000:06:00.0: supports D1 D2
[    0.304682] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.306442] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.306449] pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.306530] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200
[    0.306549] pci 0000:07:00.0: reg 10: [io  0xde00-0xdeff]
[    0.306581] pci 0000:07:00.0: reg 18: [mem 0xfbcff000-0xfbcfffff 64bit pref]
[    0.306602] pci 0000:07:00.0: reg 20: [mem 0xfbcf8000-0xfbcfbfff 64bit pref]
[    0.306691] pci 0000:07:00.0: supports D1 D2
[    0.306692] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.308437] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.308442] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.308451] pci 0000:00:1c.6:   bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
[    0.308524] pci 0000:08:00.0: [1b4b:917a] type 0 class 0x000101
[    0.308540] pci 0000:08:00.0: reg 10: [io  0xcf00-0xcf07]
[    0.308552] pci 0000:08:00.0: reg 14: [io  0xce00-0xce03]
[    0.308564] pci 0000:08:00.0: reg 18: [io  0xcd00-0xcd07]
[    0.308576] pci 0000:08:00.0: reg 1c: [io  0xcc00-0xcc03]
[    0.308588] pci 0000:08:00.0: reg 20: [io  0xcb00-0xcb0f]
[    0.308600] pci 0000:08:00.0: reg 24: [mem 0xfbbff000-0xfbbff1ff]
[    0.308612] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.308670] pci 0000:08:00.0: PME# supported from D3hot
[    0.310429] pci 0000:00:1c.7: PCI bridge to [bus 08-08]
[    0.310433] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.310438] pci 0000:00:1c.7:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.310486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.310562] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.310581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.310599] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.310615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.310631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.310647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.310662] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    0.310691]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.310693]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.310694] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.315115] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.315143] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.315170] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.315196] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.315222] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.315250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.315276] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.315302] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.315355] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.315357] vgaarb: loaded
[    0.315358] vgaarb: bridge control possible 0000:01:00.0
[    0.315390] PCI: Using ACPI for IRQ routing
[    0.316736] PCI: pci_cache_line_size set to 64 bytes
[    0.316810] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.316811] reserve RAM buffer: 00000000df780000 - 00000000dfffffff
[    0.316813] reserve RAM buffer: 000000011f800000 - 000000011fffffff
[    0.316870] NetLabel: Initializing
[    0.316871] NetLabel:  domain hash size = 128
[    0.316872] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.316879] NetLabel:  unlabeled traffic allowed by default
[    0.316890] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.316894] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.318902] Switching to clocksource hpet
[    0.322238] pnp: PnP ACPI init
[    0.322246] ACPI: bus type pnp registered
[    0.322290] pnp 00:00: [bus 00-3f]
[    0.322292] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.322293] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.322294] pnp 00:00: [io  0x0d00-0xffff window]
[    0.322296] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.322297] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.322300] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.322301] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[    0.322326] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.322373] pnp 00:01: [io  0x0010-0x001f]
[    0.322374] pnp 00:01: [io  0x0022-0x003f]
[    0.322376] pnp 00:01: [io  0x0044-0x004d]
[    0.322377] pnp 00:01: [io  0x0050-0x005f]
[    0.322378] pnp 00:01: [io  0x0062-0x0063]
[    0.322379] pnp 00:01: [io  0x0065-0x006f]
[    0.322380] pnp 00:01: [io  0x0074-0x007f]
[    0.322381] pnp 00:01: [io  0x0091-0x0093]
[    0.322382] pnp 00:01: [io  0x00a2-0x00bf]
[    0.322383] pnp 00:01: [io  0x00e0-0x00ef]
[    0.322385] pnp 00:01: [io  0x04d0-0x04d1]
[    0.322386] pnp 00:01: [io  0x0290-0x029f]
[    0.322387] pnp 00:01: [io  0x0800-0x0805]
[    0.322388] pnp 00:01: [io  0x0290-0x0294]
[    0.322389] pnp 00:01: [io  0x0880-0x088f]
[    0.322419] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.322420] system 00:01: [io  0x0290-0x029f] has been reserved
[    0.322422] system 00:01: [io  0x0800-0x0805] has been reserved
[    0.322424] system 00:01: [io  0x0290-0x0294] has been reserved
[    0.322425] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.322427] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322434] pnp 00:02: [dma 4]
[    0.322435] pnp 00:02: [io  0x0000-0x000f]
[    0.322437] pnp 00:02: [io  0x0080-0x0090]
[    0.322438] pnp 00:02: [io  0x0094-0x009f]
[    0.322439] pnp 00:02: [io  0x00c0-0x00df]
[    0.322453] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.322481] pnp 00:03: [irq 0 disabled]
[    0.322488] pnp 00:03: [irq 8]
[    0.322489] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.322502] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.322517] pnp 00:04: [io  0x0070-0x0073]
[    0.322531] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.322536] pnp 00:05: [io  0x0061]
[    0.322548] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.322553] pnp 00:06: [io  0x00f0-0x00ff]
[    0.322557] pnp 00:06: [irq 13]
[    0.322571] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.322725] pnp 00:07: [io  0x03f8-0x03ff]
[    0.322729] pnp 00:07: [irq 4]
[    0.322764] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.322791] pnp 00:08: [io  0x0060]
[    0.322792] pnp 00:08: [io  0x0064]
[    0.322796] pnp 00:08: [irq 12]
[    0.322809] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.322845] pnp 00:09: [io  0x0400-0x04cf]
[    0.322846] pnp 00:09: [io  0x04d2-0x04ff]
[    0.322870] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.322872] system 00:09: [io  0x04d2-0x04ff] has been reserved
[    0.322874] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322881] pnp 00:0a: [io  0x1000-0x107f]
[    0.322882] pnp 00:0a: [io  0x1080-0x10ff]
[    0.322883] pnp 00:0a: [io  0x1100-0x117f]
[    0.322885] pnp 00:0a: [io  0x1180-0x11ff]
[    0.322909] system 00:0a: [io  0x1000-0x107f] has been reserved
[    0.322910] system 00:0a: [io  0x1080-0x10ff] has been reserved
[    0.322912] system 00:0a: [io  0x1100-0x117f] has been reserved
[    0.322919] system 00:0a: [io  0x1180-0x11ff] has been reserved
[    0.322921] system 00:0a: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[    0.323023] pnp 00:0b: [io  0x0454-0x0457]
[    0.323050] system 00:0b: [io  0x0454-0x0457] has been reserved
[    0.323052] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.323062] pnp 00:0c: [mem 0xf4000000-0xf7ffffff]
[    0.323091] system 00:0c: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.323093] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.323187] pnp 00:0d: [mem 0x000ce800-0x000cffff]
[    0.323188] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[    0.323189] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[    0.323191] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.323192] pnp 00:0d: [mem 0xdf780000-0xdf7dffff]
[    0.323193] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.323194] pnp 00:0d: [mem 0x00100000-0xdf77ffff]
[    0.323196] pnp 00:0d: [mem 0xdf7e0000-0xdf7fffff]
[    0.323197] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.323198] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[    0.323199] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.323201] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.323202] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.323203] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.323204] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.323205] pnp 00:0d: [mem 0x20000000-0x201fffff]
[    0.323207] pnp 00:0d: [mem 0x40000000-0x400fffff]
[    0.323208] pnp 00:0d: [mem 0xdf800000-0xdfffffff]
[    0.323244] system 00:0d: [mem 0x000ce800-0x000cffff] has been reserved
[    0.323246] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.323247] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.323249] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.323251] system 00:0d: [mem 0xdf780000-0xdf7dffff] could not be reserved
[    0.323252] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.323254] system 00:0d: [mem 0x00100000-0xdf77ffff] could not be reserved
[    0.323256] system 00:0d: [mem 0xdf7e0000-0xdf7fffff] has been reserved
[    0.323257] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.323259] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.323261] system 00:0d: [mem 0xfed20000-0xfed8ffff] could not be reserved
[    0.323262] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.323264] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.323266] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.323267] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.323269] system 00:0d: [mem 0x20000000-0x201fffff] could not be reserved
[    0.323271] system 00:0d: [mem 0x40000000-0x400fffff] could not be reserved
[    0.323272] system 00:0d: [mem 0xdf800000-0xdfffffff] could not be reserved
[    0.323274] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.323284] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[    0.323304] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[    0.323308] pnp: PnP ACPI: found 15 devices
[    0.323309] ACPI: ACPI bus type pnp unregistered
[    0.328965] PCI: max bus depth: 2 pci_try_num: 3
[    0.329027] pci 0000:00:1c.7: BAR 15: assigned [mem 0xf0000000-0xf00fffff pref]
[    0.329029] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0100000-0xf02fffff]
[    0.329032] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0300000-0xf04fffff 64bit pref]
[    0.329034] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.329036] pci 0000:01:00.0: BAR 6: assigned [mem 0xfba00000-0xfba1ffff pref]
[    0.329038] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.329040] pci 0000:00:01.0:   bridge window [io  0xb000-0xbfff]
[    0.329042] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
[    0.329044] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.329047] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.329049] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.329054] pci 0000:00:1c.0:   bridge window [mem 0xf0100000-0xf02fffff]
[    0.329057] pci 0000:00:1c.0:   bridge window [mem 0xf0300000-0xf04fffff 64bit pref]
[    0.329062] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[    0.329066] pci 0000:03:00.0:   bridge window [io  0xe000-0xefff]
[    0.329075] pci 0000:03:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.329090] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[    0.329093] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.329097] pci 0000:00:1c.3:   bridge window [mem 0xfb900000-0xfb9fffff]
[    0.329104] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[    0.329108] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.329115] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[    0.329119] pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.329127] pci 0000:00:1c.6: PCI bridge to [bus 07-07]
[    0.329129] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.329135] pci 0000:00:1c.6:   bridge window [mem 0xfbc00000-0xfbcfffff 64bit pref]
[    0.329141] pci 0000:08:00.0: BAR 6: assigned [mem 0xf0000000-0xf000ffff pref]
[    0.329142] pci 0000:00:1c.7: PCI bridge to [bus 08-08]
[    0.329144] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.329149] pci 0000:00:1c.7:   bridge window [mem 0xfbb00000-0xfbbfffff]
[    0.329152] pci 0000:00:1c.7:   bridge window [mem 0xf0000000-0xf00fffff pref]
[    0.329167] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.329188] pci 0000:03:00.0: setting latency timer to 64
[    0.329210] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.329211] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.329213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.329214] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.329216] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.329217] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xfebfffff]
[    0.329218] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.329220] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
[    0.329221] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.329223] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.329224] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf02fffff]
[    0.329226] pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf04fffff 64bit pref]
[    0.329227] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.329229] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.329230] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.329231] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.329233] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.329234] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.329236] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.329237] pci_bus 0000:03: resource 9 [mem 0xe0000000-0xfebfffff]
[    0.329238] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.329240] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
[    0.329241] pci_bus 0000:04: resource 4 [io  0xe000-0xefff]
[    0.329243] pci_bus 0000:04: resource 5 [mem 0xfb900000-0xfb9fffff]
[    0.329244] pci_bus 0000:04: resource 8 [io  0x0000-0x0cf7]
[    0.329245] pci_bus 0000:04: resource 9 [io  0x0d00-0xffff]
[    0.329247] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[    0.329248] pci_bus 0000:04: resource 11 [mem 0x000c0000-0x000dffff]
[    0.329250] pci_bus 0000:04: resource 12 [mem 0xfed40000-0xfed44fff]
[    0.329251] pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfebfffff]
[    0.329253] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.329254] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.329256] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
[    0.329257] pci_bus 0000:07: resource 2 [mem 0xfbc00000-0xfbcfffff 64bit pref]
[    0.329259] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
[    0.329260] pci_bus 0000:08: resource 1 [mem 0xfbb00000-0xfbbfffff]
[    0.329261] pci_bus 0000:08: resource 2 [mem 0xf0000000-0xf00fffff pref]
[    0.329279] NET: Registered protocol family 2
[    0.329380] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.330054] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.331741] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.331959] TCP: Hash tables configured (established 524288 bind 65536)
[    0.331961] TCP reno registered
[    0.331968] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.331987] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.332057] NET: Registered protocol family 1
[    0.353867] pci 0000:01:00.0: Boot video device
[    0.353966] PCI: CLS 4 bytes, default 64
[    0.354002] Trying to unpack rootfs image as initramfs...
[    0.415239] Freeing initrd memory: 6488k freed
[    0.415914] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.415918] Placing 64MB software IO TLB between ffff8800db77a000 - ffff8800df77a000
[    0.415919] software IO TLB at phys 0xdb77a000 - 0xdf77a000
[    0.416213] audit: initializing netlink socket (disabled)
[    0.416222] type=2000 audit(1346277777.249:1): initialized
[    0.427396] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.428570] VFS: Disk quotas dquot_6.5.2
[    0.428604] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.428703] msgmni has been set to 7874
[    0.428823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.428840] io scheduler noop registered
[    0.428841] io scheduler deadline registered
[    0.428870] io scheduler cfq registered (default)
[    0.428943] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.429197] vesafb: mode is 800x600x16, linelength=1600, pages=16
[    0.429198] vesafb: scrolling: redraw
[    0.429200] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.429411] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
[    0.440075] Console: switching to colour frame buffer device 100x37
[    0.450628] fb0: VESA VGA frame buffer device
[    0.450638] intel_idle: MWAIT substates: 0x1120
[    0.450639] intel_idle: v0.4 model 0x2A
[    0.450640] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.450662] GHES: HEST is not enabled!
[    0.450690] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.471184] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.491852] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.491996] Linux agpgart interface v0.103
[    0.492798] brd: module loaded
[    0.492853] i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[    0.492854] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.493216] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.493219] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.493274] mousedev: PS/2 mouse device common for all mice
[    0.493327] rtc_cmos 00:04: RTC can wake from S4
[    0.493411] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.493436] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.493486] cpuidle: using governor ladder
[    0.493536] cpuidle: using governor menu
[    0.493647] TCP cubic registered
[    0.493649] Registering the dns_resolver key type
[    0.493716] PM: Checking hibernation image partition UUID=8fd86b5b-6610-40d9-953d-5cea9936ce48
[    1.415167] Refined TSC clocksource calibration: 2893.427 MHz.
[    1.415173] Switching to clocksource tsc
[    1.454805] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input0
[    1.457877] PM: Hibernation image not present or could not be loaded.
[    1.457886] registered taskstats version 1
[    1.458296]   Magic number: 8:488:48
[    1.458367] rtc_cmos 00:04: setting system clock to 2012-08-29 22:02:58 UTC (1346277778)
[    1.458369] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    1.459370] Freeing unused kernel memory: 744k freed
[    1.459446] Write protecting the kernel read-only data: 10240k
[    1.462885] Freeing unused kernel memory: 1660k freed
[    1.466935] Freeing unused kernel memory: 1996k freed
[    1.488654] SCSI subsystem initialized
[    1.497235] libata version 3.00 loaded.
[    1.499651] ahci 0000:08:00.0: version 3.0
[    1.499718] ahci 0000:08:00.0: irq 41 for MSI/MSI-X
[    1.499776] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl IDE mode
[    1.499778] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    1.499981] scsi0 : ahci
[    1.500066] scsi1 : ahci
[    1.500089] ata1: SATA max UDMA/133 abar m512@0xfbbff000 port 0xfbbff100 irq 41
[    1.500092] ata2: SATA max UDMA/133 abar m512@0xfbbff000 port 0xfbbff180 irq 41
[    1.804182] ata1: SATA link down (SStatus 0 SControl 300)
[    1.804218] ata2: SATA link down (SStatus 0 SControl 300)
[    1.806555] ata_piix 0000:00:1f.2: version 2.13
[    1.806565] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    1.806597] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.806739] scsi2 : ata_piix
[    1.806778] scsi3 : ata_piix
[    1.807055] ata3: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19
[    1.807060] ata4: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19
[    1.807075] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.807101] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.807245] scsi4 : ata_piix
[    1.807312] scsi5 : ata_piix
[    1.807505] ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[    1.807508] ata6: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[    2.122135] ata6: SATA link down (SStatus 0 SControl 300)
[    2.132938] ata5: SATA link down (SStatus 0 SControl 300)
[    2.434382] ata3.00: SATA link down (SStatus 0 SControl 300)
[    2.434395] ata3.01: SATA link down (SStatus 0 SControl 300)
[    2.565288] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.565311] ata4.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.571676] ata4.00: ATA-8: ST3250318AS, CC38, max UDMA/133
[    2.571681] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.571689] ata4.01: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
[    2.577663] ata4.00: configured for UDMA/133
[    2.583398] ata4.01: configured for UDMA/100
[    2.584224] scsi 3:0:0:0: Direct-Access     ATA      ST3250318AS      CC38 PQ: 0 ANSI: 5
[    2.585013] scsi 3:0:1:0: CD-ROM            Optiarc  DVD RW AD-5280S  1.01 PQ: 0 ANSI: 5


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 22:24 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
В продолжение:

[Показать] Скрытый текст:
[    2.587852] dracut: dracut-017-16.mga2
[    2.607914] udevd[110]: starting version 181
[    2.626110] [drm] Initialized drm 1.1.0 20060810
[    2.661505] [drm] radeon defaulting to kernel modesetting.
[    2.661507] [drm] radeon kernel modesetting enabled.
[    2.661543] checking generic (e0000000 1000000) vs hw (e0000000 10000000)
[    2.661544] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.661556] Console: switching to colour dummy device 80x25
[    2.661806] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1462:0x2340).
[    2.661832] [drm] register mmio base: 0xFBAC0000
[    2.661833] [drm] register mmio size: 131072
[    2.661973] ATOM BIOS: 113
[    2.662039] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    2.662041] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[    2.662045] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    2.662046] [drm] Detected VRAM RAM=1024M, BAR=256M
[    2.662047] [drm] RAM width 64bits DDR
[    2.662103] [TTM] Zone  kernel: Available graphics memory: 2018016 kiB.
[    2.662104] [TTM] Initializing pool allocator.
[    2.662107] [TTM] Initializing DMA pool allocator.
[    2.662119] [drm] radeon: 1024M of VRAM memory ready
[    2.662120] [drm] radeon: 512M of GTT memory ready.
[    2.662127] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.662128] [drm] Driver supports precise vblank timestamp query.
[    2.662157] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[    2.662163] radeon 0000:01:00.0: radeon: using MSI.
[    2.662191] [drm] radeon: irq initialized.
[    2.662194] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.662510] [drm] radeon: ib pool ready.
[    2.662558] [drm] Loading CEDAR Microcode
[    2.664868] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[    2.664963] radeon 0000:01:00.0: WB enabled
[    2.664965] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff8801179f4c00
[    2.681271] [drm] ring test on 0 succeeded in 1 usecs
[    2.681446] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.681591] [drm] Radeon Display Connectors
[    2.681592] [drm] Connector 0:
[    2.681593] [drm]   HDMI-A
[    2.681593] [drm]   HPD1
[    2.681595] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.681596] [drm]   Encoders:
[    2.681597] [drm]     DFP1: INTERNAL_UNIPHY1
[    2.681597] [drm] Connector 1:
[    2.681598] [drm]   DVI-I
[    2.681599] [drm]   HPD4
[    2.681600] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    2.681601] [drm]   Encoders:
[    2.681602] [drm]     DFP2: INTERNAL_UNIPHY
[    2.681603] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.681604] [drm] Connector 2:
[    2.681605] [drm]   VGA
[    2.681606] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.681607] [drm]   Encoders:
[    2.681608] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    2.681634] [drm] Internal thermal controller with fan control
[    2.681654] [drm] radeon: power management initialized
[    2.737844] [drm] fb mappable at 0xE0142000
[    2.737846] [drm] vram apper at 0xE0000000
[    2.737847] [drm] size 5324800
[    2.737848] [drm] fb depth is 24
[    2.737848] [drm]    pitch is 5888
[    2.737905] fbcon: radeondrmfb (fb0) is primary device
[    2.942381] Console: switching to colour frame buffer device 180x56
[    2.944286] fb0: radeondrmfb frame buffer device
[    2.944287] drm: registered panic notifier
[    2.944293] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:00.0 on minor 0
[    2.965407] dracut: Starting plymouth daemon
[    3.692956] usbcore: registered new interface driver usbfs
[    3.692971] usbcore: registered new interface driver hub
[    3.692996] usbcore: registered new device driver usb
[    3.696115] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.696155] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.696158] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    3.696173] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.696196] ehci_hcd 0000:00:1a.0: debug port 2
[    3.700079] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[    3.700103] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[    3.700187] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    3.700189] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.700206] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    3.700230] sd 3:0:0:0: [sda] Write Protect is off
[    3.700231] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.700242] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.700461] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    3.705250] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    3.705269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.705271] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.705272] usb usb1: Product: EHCI Host Controller
[    3.705274] usb usb1: Manufacturer: Linux 3.3.8-desktop-2.mga2 ehci_hcd
[    3.705275] usb usb1: SerialNumber: 0000:00:1a.0
[    3.705354] hub 1-0:1.0: USB hub found
[    3.705358] hub 1-0:1.0: 2 ports detected
[    3.705517] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.705520] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    3.705526] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.705546] ehci_hcd 0000:00:1d.0: debug port 2
[    3.709423] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[    3.709537] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[    3.711546] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.711554] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    3.711670] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfbef8000
[    3.711740] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[    3.711799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.711800] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711802] usb usb3: Product: xHCI Host Controller
[    3.711803] usb usb3: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.711804] usb usb3: SerialNumber: 0000:05:00.0
[    3.711854] xHCI xhci_add_endpoint called for root hub
[    3.711855] xHCI xhci_check_bandwidth called for root hub
[    3.711873] hub 3-0:1.0: USB hub found
[    3.711880] hub 3-0:1.0: 2 ports detected
[    3.711921] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.711925] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    3.711937] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    3.711939] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711940] usb usb4: Product: xHCI Host Controller
[    3.711942] usb usb4: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.711943] usb usb4: SerialNumber: 0000:05:00.0
[    3.711980] xHCI xhci_add_endpoint called for root hub
[    3.711981] xHCI xhci_check_bandwidth called for root hub
[    3.711996] hub 4-0:1.0: USB hub found
[    3.712002] hub 4-0:1.0: 2 ports detected
[    3.715279] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    3.715296] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[    3.715413] xhci_hcd 0000:06:00.0: irq 17, io mem 0xfbdf8000
[    3.715480] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[    3.715538] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.715539] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.715541] usb usb5: Product: xHCI Host Controller
[    3.715542] usb usb5: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.715543] usb usb5: SerialNumber: 0000:06:00.0
[    3.715653] xHCI xhci_add_endpoint called for root hub
[    3.715655] xHCI xhci_check_bandwidth called for root hub
[    3.715674] hub 5-0:1.0: USB hub found
[    3.715681] hub 5-0:1.0: 2 ports detected
[    3.715718] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    3.715722] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[    3.715735] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.715737] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.715738] usb usb6: Product: xHCI Host Controller
[    3.715739] usb usb6: Manufacturer: Linux 3.3.8-desktop-2.mga2 xhci_hcd
[    3.715741] usb usb6: SerialNumber: 0000:06:00.0
[    3.715855] xHCI xhci_add_endpoint called for root hub
[    3.715857] xHCI xhci_check_bandwidth called for root hub
[    3.715878] hub 6-0:1.0: USB hub found
[    3.715884] hub 6-0:1.0: 2 ports detected
[    3.716222] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.716243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.716246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.716249] usb usb2: Product: EHCI Host Controller
[    3.716251] usb usb2: Manufacturer: Linux 3.3.8-desktop-2.mga2 ehci_hcd
[    3.716254] usb usb2: SerialNumber: 0000:00:1d.0
[    3.716353] hub 2-0:1.0: USB hub found
[    3.716356] hub 2-0:1.0: 2 ports detected
[    3.740267] firewire_ohci: Added fw-ohci device 0000:04:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    3.770597]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    3.771228] sd 3:0:0:0: [sda] Attached SCSI disk
[    4.006503] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    4.120564] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    4.120569] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.120863] hub 1-1:1.0: USB hub found
[    4.120947] hub 1-1:1.0: 6 ports detected
[    4.222920] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    4.240027] firewire_core: created device fw0: GUID 0049e5502b8a0000, S400
[    4.337007] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    4.337012] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.337270] hub 2-1:1.0: USB hub found
[    4.337374] hub 2-1:1.0: 8 ports detected
[    4.411611] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[    4.421933] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    4.421936] PM: Marking nosave pages: 00000000df780000 - 0000000100000000
[    4.422214] PM: Basic memory bitmaps created
[    4.433845] PM: Basic memory bitmaps freed
[    4.435735] PM: Starting manual resume from disk
[    4.435738] PM: Hibernation image partition 8:6 present
[    4.435739] PM: Looking for hibernation image.
[    4.475085] PM: Image not found (code -22)
[    4.475088] PM: Hibernation image not present or could not be loaded.
[    4.507571] usb 1-1.2: New USB device found, idVendor=1a5c, idProduct=3112
[    4.507575] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.507579] usb 1-1.2: Product: Speed Wheel 5 PRO
[    4.507581] usb 1-1.2: Manufacturer: A⁒䬀䤀一伀 
[    4.522288] input: A⁒䬀䤀一伀  Speed Wheel 5 PRO as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[    4.522394] generic-usb 0003:1A5C:3112.0001: input,hidraw0: USB HID v1.00 Joystick [A⁒䬀䤀一伀  Speed Wheel 5 PRO] on usb-0000:00:1a.0-1.2/input0
[    4.522405] usbcore: registered new interface driver usbhid
[    4.522406] usbhid: USB HID core driver
[    4.581177] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[    4.588194] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.642660] dracut: Checking ext4: /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a
[    4.642691] dracut: issuing e2fsck -a  /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a
[    4.689958] dracut: /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a: clean, 166117/2793472 files, 1672761/11157226 blocks
[    4.690112] dracut: Remounting /dev/disk/by-uuid/8bfd658e-dfcf-4347-bd81-6f5c8178570a with -o acl,noatime,ro
[    4.733526] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl
[    4.809641] dracut: Mounted root filesystem /dev/sda5
[    4.885971] usb 1-1.3: New USB device found, idVendor=046d, idProduct=0825
[    4.885975] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    4.885979] usb 1-1.3: SerialNumber: 32BFE2A0
[    4.959197] usb 1-1.5: new low-speed USB device number 5 using ehci_hcd
[    5.058360] usb 1-1.5: New USB device found, idVendor=04d9, idProduct=1203
[    5.058365] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.067557] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input2
[    5.067617] generic-usb 0003:04D9:1203.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:1a.0-1.5/input0
[    5.082567] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input3
[    5.082661] generic-usb 0003:04D9:1203.0003: input,hidraw2: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:1a.0-1.5/input1
[    5.121468] dracut: Switching root
[    5.122228] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    5.155680] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[    5.242998] usb 2-1.1: New USB device found, idVendor=058f, idProduct=6364
[    5.243002] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.243006] usb 2-1.1: Product: Mass Storage Device
[    5.243008] usb 2-1.1: Manufacturer: Generic
[    5.243010] usb 2-1.1: SerialNumber: 058F63646476
[    5.244461] generic-usb 0003:058F:6364.0004: hiddev0,hidraw3: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1d.0-1.1/input1
[    5.727888] NET: Registered protocol family 10
[    6.907341] udevd[303]: starting version 181
[    7.109260] EXT4-fs (sda5): re-mounted. Opts: acl
[    8.537395] Non-volatile memory driver v1.3
[    9.571393] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    9.571445] ACPI: Power Button [PWRB]
[    9.571489] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    9.571534] ACPI: Power Button [PWRF]
[    9.725893] iTCO_vendor_support: vendor-support=0
[    9.748575] wmi: Mapper loaded
[    9.765118] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    9.765343] mei 0000:00:16.0: setting latency timer to 64
[    9.765390] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[    9.842730] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    9.842789] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    9.990886] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   10.202128] hda_codec: ALC889: BIOS auto-probing.
[   10.202131] SKU: Nid=0x1d sku_cfg=0x4005e601
[   10.202132] SKU: port_connectivity=0x1
[   10.202133] SKU: enable_pcbeep=0x0
[   10.202134] SKU: check_sum=0x00000005
[   10.202135] SKU: customization=0x000000e6
[   10.202136] SKU: external_amp=0x0
[   10.202136] SKU: platform_type=0x0
[   10.202137] SKU: swap=0x0
[   10.202138] SKU: override=0x1
[   10.202141] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   10.202143]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.202144]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   10.202145]    mono: mono_out=0x0
[   10.202145]    dig-out=0x11/0x1e
[   10.202146]    inputs: Rear Mic=0x18 Front Mic=0x19 Line=0x1a
[   10.204826] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   10.204828] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   10.211100] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   10.211153] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   10.211193] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   10.211232] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.211264] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.211297] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.211331] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.211365] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.212308] hda-intel: Using LPIB position fix
[   10.212367] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[   10.215573] hda-intel: Enable sync_write for stable communication
[   10.231954] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.232082] r8169 0000:07:00.0: irq 48 for MSI/MSI-X
[   10.232341] r8169 0000:07:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000509e000, 50:e5:49:34:52:fa, XID 0c900800 IRQ 48
[   10.232344] r8169 0000:07:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   10.245977] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   10.246030] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[   10.925854] Linux media interface: v0.10
[   10.934672] Linux video capture interface: v2.00
[   11.004322] usbcore: registered new interface driver uas
[   11.007983] Initializing USB Mass Storage driver...
[   11.008091] scsi6 : usb-storage 2-1.1:1.0
[   11.008134] usbcore: registered new interface driver usb-storage
[   11.008135] USB Mass Storage support registered.
[   11.807595] 4:3:1: cannot set freq 16000 to ep 0x86
[   11.945064] current rate 290 is different from the runtime rate 24000
[   11.954304] 5:2: cannot get min/max values for control 2 (id 5)
[   11.954490] usbcore: registered new interface driver snd-usb-audio
[   11.954522] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[   11.968763] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
[   11.968825] usbcore: registered new interface driver uvcvideo
[   11.968827] USB Video Class driver (1.1.1)
[   12.008668] scsi 6:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[   12.010910] scsi 6:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[   12.012891] scsi 6:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[   12.015758] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[   12.034471] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   12.037468] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   12.039834] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   12.040629] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   13.104614] Adding 4175868k swap on /dev/sda6.  Priority:0 extents:1 across:4175868k
[   13.352204] device-mapper: uevent: version 1.0.3
[   13.352272] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[   13.503460] fuse init (API version 7.18)
[   16.027762] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[   16.027777] REISERFS (device sda7): using ordered data mode
[   16.027780] reiserfs: using flush barriers
[   16.037818] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   16.038041] REISERFS (device sda7): checking transaction log (sda7)
[   16.234649] REISERFS (device sda7): Using r5 hash to sort names
[   20.697860] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[   20.698215] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[   20.698372] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x14
[   20.698520] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x14
[   20.698685] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   20.723446] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
[   20.724071] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
[   20.724534] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
[   20.725005] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
[   20.727464] microcode: Microcode Update Driver: v2.00 removed.
[   21.162266] r8169 0000:07:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[   21.172429] r8169 0000:07:00.0: eth0: link down
[   21.172440] r8169 0000:07:00.0: eth0: link down
[   21.172707] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.187711] Bluetooth: Core ver 2.16
[   21.187724] NET: Registered protocol family 31
[   21.187726] Bluetooth: HCI device and connection manager initialized
[   21.187728] Bluetooth: HCI socket layer initialized
[   21.187729] Bluetooth: L2CAP socket layer initialized
[   21.187732] Bluetooth: SCO socket layer initialized
[   21.189982] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.189984] Bluetooth: BNEP filters: protocol multicast
[   21.567902] ata4.00: configured for UDMA/133
[   21.573700] ata4.01: configured for UDMA/100
[   21.573707] ata4: EH complete
[   22.438240] EXT4-fs (sda5): re-mounted. Opts: acl,commit=0
[   22.588124] radeon 0000:01:00.0: evergreen_cs_track_validate_texture:835 texture bo too small (layer size 5529600, offset 0, max layer 1, depth 1, bo size 5300224) (1536 900)
[   22.588127] [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
[   22.876843] r8169 0000:07:00.0: eth0: link up
[   22.877069] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.889927] NET: Registered protocol family 17
[   24.376792] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.466072] FS-Cache: Loaded
[   24.479504] RPC: Registered named UNIX socket transport module.
[   24.479506] RPC: Registered udp transport module.
[   24.479507] RPC: Registered tcp transport module.
[   24.479508] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.501089] FS-Cache: Netfs 'nfs' registered for caching
[   24.528811] Netfilter messages via NETLINK v0.30.
[   24.535922] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   24.548776] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   24.561699] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   24.581521] NFSD: starting 90-second grace period
[   24.585852] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.586122] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   24.586124] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   24.604611] ctnetlink v0.93: registering with nfnetlink.
[   24.651139] ip_set: protocol 6
[   24.659793] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   24.875549] xt_time: kernel timezone is +0400
[   24.955447] Bridge firewalling registered
[   25.035137] u32 classifier
[   25.035139]     Actions configured
[   25.762543] netfilter PSD loaded - (c) astaro AG
[   25.763897] IFWLOG: register target
[   26.963863] ppdev: user-space parallel port driver
[   26.965540] ppdev0: no associated port!
[   33.442969] eth0: no IPv6 routers present
[   74.096845] usb 1-1.1: new high-speed USB device number 6 using ehci_hcd
[   74.182618] usb 1-1.1: New USB device found, idVendor=1004, idProduct=631c
[   74.182620] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   74.182622] usb 1-1.1: Product: LG-P705
[   74.182623] usb 1-1.1: Manufacturer: LGE
[   74.182624] usb 1-1.1: SerialNumber: LGOTMS6fd27b3


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 23:16 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
skan40 писал(а):
Если бы внешний накопитель не был включен - смартфон в данном случае, то он бы не выдал бы информацию  в трее - Синхронизация через USB мультимедиа данных. Но по скольку он выдал это - подключение к РС идёт.
Синхронизация по какому протоколу имеется в виду, Вы в курсе? Я нет. Но по идее должен быть отдельный режим внешнего накопителя (если его из 4 Андроида не выпилили, конечно). Ковыряйте настройки смарта.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 29 авг 2012 23:38 

Зарегистрирован: 27 авг 2012 21:06
Сообщения: 11
Синхронизация по MTP.  Режим внешнего накопителя, о котором вы говорите - это и есть - стандарное usb соединение, еси бы этого режима не было, то и к винде бы не подсоеденился.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 30 авг 2012 00:24 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
skan40 писал(а):
Синхронизация по MTP.  Режим внешнего накопителя, о котором вы говорите - это и есть - стандарное usb соединение, еси бы этого режима не было, то и к винде бы не подсоеденился.
А что, бывают нестандартные USB-соединения?
Ещё раз: синхронизация по MTP, если там MTP, и работа в режиме USB-накопителя - это разные вещи. Ищите, где они переключаются, если переключаются.

Upd. Как вариант - попробовать использовать mtpfs. В Мандриве есть в contrib, за Магею не скажу. Ещё есть какой-то devicesync.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Не монтируется смартфон LG Optimus L7 ( в дистр. Mageia
СообщениеДобавлено: 30 авг 2012 05:42 
Аватара пользователя

Зарегистрирован: 03 мар 2010 06:52
Сообщения: 1559
Смарт монтируется как стандартный USB накопитель, что в третьем, что в четвертом Андроиде. И видит его комп что в Мандриве, что Арче - одинаково.
Нужно не забывать вытаскивать на смарте статусные сообщения, тыкать в строку "USB соединение установлено", потом ткнуть в кнопку "Подключить как USB накопитель", подтвердить что это действительно нужно, потом на компе примонтировать появившийся накопитель.


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 23 ]  На страницу 1, 2, 3  След.

Часовой пояс: UTC + 3 часа [ Летнее время ]


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Русская поддержка phpBB