EduMandriva

форум российского сообщества Edumandriva

Форум предназначен для обсуждения вопросов проекта Edumandriva. По вопросам дистрибутивов Mandriva и РОСА просьба обращаться на forum.rosalab.ru, unixforum.org и linuxforum.ru

Текущее время: 29 мар 2020 13:09

Часовой пояс: UTC + 3 часа [ Летнее время ]




Начать новую тему Ответить на тему  [ Сообщений: 9 ] 
Автор Сообщение
 Заголовок сообщения: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 09:51 
Аватара пользователя

Зарегистрирован: 12 апр 2011 10:01
Сообщения: 330
При подключении к компьютеру  "Mini DVR ES-01" определяется как usb камера (так и должно быть), но устройство не работает.
[Показать] Скрытый текст:

[Показать] Скрытый текст:

При попытке использовать устройство в скайпе видно следующее:
[Показать] Скрытый текст:

Можно ли использовать данное устройство в мандриве и как это сделать, если для примера в винде 7 оно автоматом ставится и скайпе и в майлагенте. И используется как вебкамера.
Описание устройства

_________________
Mandriva Free 2010.2 - 64 bit. KDE 4.5.5 ATI Radeon Sapphire HD-4870 1гб.


Последний раз редактировалось alex150578 06 авг 2011 10:01, всего редактировалось 1 раз.

Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 09:57 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
Покажите, что в dmesg | tail после подключения.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 10:04 
Аватара пользователя

Зарегистрирован: 12 апр 2011 10:01
Сообщения: 330
Получилось следующее:
Код:
[alex@localhost ~]$ dmesg | tail
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
[alex@localhost ~]$

_________________
Mandriva Free 2010.2 - 64 bit. KDE 4.5.5 ATI Radeon Sapphire HD-4870 1гб.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 10:59 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
Что это за фигня? Давайте тогда так:
Код:
dmesg | grep -C5 -i usb


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 11:07 
Аватара пользователя

Зарегистрирован: 12 апр 2011 10:01
Сообщения: 330
сделал, получилось следующее:
[Показать] Скрытый текст:
Код:
[alex@localhost ~]$ dmesg | grep -C5 -i usb
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
usb 6-1: new full speed USB device using uhci_hcd and address 8
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1542
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
scsi9 : usb-storage 6-1:1.0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
VFS: busy inodes on changed media or resized disk sr0
--
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] Attached SCSI removable disk
usb 6-1: USB disconnect, address 8
usb 6-1: new full speed USB device using uhci_hcd and address 9
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1543
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
uvcvideo: Found UVC 1.00 device iMagic Product (0851:1543)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
VFS: busy inodes on changed media or resized disk sr0
[alex@localhost ~]$

_________________
Mandriva Free 2010.2 - 64 bit. KDE 4.5.5 ATI Radeon Sapphire HD-4870 1гб.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 11:20 

Зарегистрирован: 06 мар 2010 14:55
Сообщения: 2696
Цитата:
uvcvideo: Found UVC 1.00 device iMagic Product (0851:1543)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).

Это как бы намекает, что работать девайс не будет. По крайней мере с данной версией uvcvideo.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 06 авг 2011 11:29 
Аватара пользователя

Зарегистрирован: 12 апр 2011 10:01
Сообщения: 330
Работать вообще не будет или надо чтото установить дополнительно?
uvcvideo это как то зависит от видеокарты? У меня стоит ати радеон сапфир HD-4870 дрова стоят свободные, если поставить от производителя картинка тупит жестко. Как будто с проца сняли радиатор с кулером.

_________________
Mandriva Free 2010.2 - 64 bit. KDE 4.5.5 ATI Radeon Sapphire HD-4870 1гб.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 03 дек 2011 05:05 
Аватара пользователя

Зарегистрирован: 12 апр 2011 10:01
Сообщения: 330
вот еще дали ссылку, только я ничего там не понял http://www.ideasonboard.org/uvc/ выполнил команды в терминале, создался лог файл, вывод вот:
[Показать] Скрытый текст:
Код:
octl_giwscan. 2(2) BSS returned, data->length = 370
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 370
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 227
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
wlan0: no IPv6 routers present
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 2(2) BSS returned, data->length = 370
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
wlan0: no IPv6 routers present
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 2-1: USB disconnect, address 7
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
wlan0: no IPv6 routers present
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 6-1: new full speed USB device using uhci_hcd and address 5
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1542
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
scsi11 : usb-storage 6-1:1.0
scsi 11:0:0:0: Direct-Access     S_DISK   SD               0.00 PQ: 0 ANSI: 0 CCS
sd 11:0:0:0: Attached scsi generic sg3 type 0
sd 11:0:0:0: [sdc] 3854336 512-byte logical blocks: (1.97 GB/1.83 GiB)
sd 11:0:0:0: [sdc] Write Protect is off
sd 11:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 11:0:0:0: [sdc] Assuming drive cache: write through
sd 11:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 11:0:0:0: [sdc] Assuming drive cache: write through
sd 11:0:0:0: [sdc] Attached SCSI removable disk
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 6-1: USB disconnect, address 5
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 2-1: new high speed USB device using ehci_hcd and address 9
usb 2-1: New USB device found, idVendor=04e8, idProduct=6032
usb 2-1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
usb 2-1: Product: Samsung G2 Portable
usb 2-1: Manufacturer: JMicron
usb 2-1: SerialNumber: 00000011E09B8
scsi12 : usb-storage 2-1:1.0
scsi 12:0:0:0: Direct-Access     Samsung  G2 Portable           PQ: 0 ANSI: 2 CCS
sd 12:0:0:0: Attached scsi generic sg3 type 0
sd 12:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 12:0:0:0: [sdc] Write Protect is off
sd 12:0:0:0: [sdc] Mode Sense: 3c 00 00 00
sd 12:0:0:0: [sdc] Assuming drive cache: write through
sd 12:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 12:0:0:0: [sdc] Assuming drive cache: write through
sd 12:0:0:0: [sdc] Attached SCSI disk
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 2-1: USB disconnect, address 9
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 6-1: new full speed USB device using uhci_hcd and address 6
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1542
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
scsi13 : usb-storage 6-1:1.0
scsi 13:0:0:0: Direct-Access     S_DISK   SD               0.00 PQ: 0 ANSI: 0 CCS
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdc] 3854336 512-byte logical blocks: (1.97 GB/1.83 GiB)
sd 13:0:0:0: [sdc] Write Protect is off
sd 13:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 13:0:0:0: [sdc] Assuming drive cache: write through
sd 13:0:0:0: [sdc] Attached SCSI removable disk
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 6-1: USB disconnect, address 6
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
wlan0: no IPv6 routers present
cdrom: This disc doesn't have any tracks I recognize!
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track
sr 1:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
end_request: I/O error, dev sr0, sector 0
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
wlan0: no IPv6 routers present
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
---> RTMPFreeTxRxRingMemory
<--- RTMPFreeTxRxRingMemory
<-- RTMPAllocTxRxRingMemory, Status=0
-->RTUSBVenderReset
<--RTUSBVenderReset
1. Phy Mode = 0
2. Phy Mode = 0
NVM is Efuse and its size =2d[2d0-2fc]
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== rt28xx_init, Status=0
0x1300 = 000a4200
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
IOCTL::unknown IOCTL's cmd = 0x00008947
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
wlan0: no IPv6 routers present
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 6-1: new full speed USB device using uhci_hcd and address 7
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1542
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
scsi14 : usb-storage 6-1:1.0
scsi 14:0:0:0: Direct-Access     S_DISK   SD               0.00 PQ: 0 ANSI: 0 CCS
sd 14:0:0:0: Attached scsi generic sg3 type 0
sd 14:0:0:0: [sdc] 3854336 512-byte logical blocks: (1.97 GB/1.83 GiB)
sd 14:0:0:0: [sdc] Write Protect is off
sd 14:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 14:0:0:0: [sdc] Assuming drive cache: write through
sd 14:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 14:0:0:0: [sdc] Assuming drive cache: write through
sd 14:0:0:0: [sdc] Attached SCSI removable disk
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 6-1: USB disconnect, address 7
usb 2-1: new high speed USB device using ehci_hcd and address 12
usb 2-1: New USB device found, idVendor=04e8, idProduct=6032
usb 2-1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
usb 2-1: Product: Samsung G2 Portable
usb 2-1: Manufacturer: JMicron
usb 2-1: SerialNumber: 00000011E09B8
scsi15 : usb-storage 2-1:1.0
scsi 15:0:0:0: Direct-Access     Samsung  G2 Portable           PQ: 0 ANSI: 2 CCS
sd 15:0:0:0: Attached scsi generic sg3 type 0
sd 15:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 15:0:0:0: [sdc] Write Protect is off
sd 15:0:0:0: [sdc] Mode Sense: 3c 00 00 00
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 15:0:0:0: [sdc] Assuming drive cache: write through
sd 15:0:0:0: [sdc] Attached SCSI disk
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
DeQueueRunning[0]= TRUE!
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
usb 2-1: USB disconnect, address 12
usb 6-1: new full speed USB device using uhci_hcd and address 8
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1542
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
scsi16 : usb-storage 6-1:1.0
scsi 16:0:0:0: Direct-Access     S_DISK   SD               0.00 PQ: 0 ANSI: 0 CCS
sd 16:0:0:0: Attached scsi generic sg3 type 0
sd 16:0:0:0: [sdc] 3854336 512-byte logical blocks: (1.97 GB/1.83 GiB)
sd 16:0:0:0: [sdc] Write Protect is off
sd 16:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 16:0:0:0: [sdc] Assuming drive cache: write through
sd 16:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 16:0:0:0: [sdc] Assuming drive cache: write through
sd 16:0:0:0: [sdc] Attached SCSI removable disk
usb 6-1: USB disconnect, address 8
usb 6-1: new full speed USB device using uhci_hcd and address 9
usb 6-1: not running at top speed; connect to a high speed hub
usb 6-1: New USB device found, idVendor=0851, idProduct=1543
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-1: Product: iMagic Product
usb 6-1: Manufacturer: MagicPixel
usb 6-1: SerialNumber: FW_Omega2
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device iMagic Product (0851:1543)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143
===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 143


_________________
Mandriva Free 2010.2 - 64 bit. KDE 4.5.5 ATI Radeon Sapphire HD-4870 1гб.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: USB камера Mini DVR ES-01
СообщениеДобавлено: 03 дек 2011 06:48 
Аватара пользователя

Зарегистрирован: 23 ноя 2010 03:27
Сообщения: 322
Судя по данной теме, у вас свойство самому отвечать на свои же вопросы. Что не может не радовать

_________________
Sackboy's правят миром!


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 9 ] 

Часовой пояс: UTC + 3 часа [ Летнее время ]


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Русская поддержка phpBB